r/Bitcoin - Using Electrum and Bootable Ubuntu USB to ...
r/Bitcoin - Using Electrum and Bootable Ubuntu USB to ...
Download - Bitcoin
Running A Full Node - Bitcoin
Help with installing bitcoin-qt on ubuntu (booted from usb ...
How to install bitcoin mining software in Ubuntu 14.04 for ...
Help with installing bitcoin-qt on ubuntu (booted from usb on a mac), from another usb
Hi everyone im quite new to bitcoin and this subreddit has been extremely helpful so thank you! Im trying to create an offline wallet and its so damn hard, since im not that good with computers... Anyways Ive been following the official guide on the bitcoin website (https://en.bitcoin.it/wiki/How_to_set_up_a_secure_offline_savings_wallet) and im on step 7 now which has been a difficult journey, (diretions on ubuntu is hard for the average user) I have downloaded bitcoin-0.8.6-linux and its on a seperate memory stick. On the read me file it says 'you need the Qt4 run-time libraries to run Bitcoin-Qt. On debian or ubuntu: 'sudo apt-get install libqtgui4' Unpack the files into a directory and run: -bin/32/bitcoin-qt (GUI, 32-bit) -bin/32/bitcoind (headless, 32-bit) -bin/64/bitcoin-qt (GUI, 64-bit) -bin/64/bitcoind (headless, 64-bit) ' K so typed sudo apt-get install libqtgui4 into terminal and it says 'libqtgui4 is already the newest version.' What do they mean by Unpack the files into a directory and run: ... ?? When I type -bin/64/bitcoin-qt (GUI, 64-bit) into terminal it says No such file or directory When I double click on bitcoin-qt file it says 'Could not display "bitcoin-qt" There is no application installed for "executable" files. Do you want to search for an application to open this file? ' clicked yes then It returns empty. Thanks in advance for your help!
BTC Node. Need help with Ubuntu and BTC core program. To the Linux experts here in reddit.
The good thing of loosing a post, is that you have to retype everything and this means that you are able to shorten the post. So. TLDR, I have 2 hdd, 80gb and 320, the second one has only, all the Blockchain info, from another already running node. I am not able to tell BTC Core program that the files are already there so he does not need to download 300gb. After hours of Google and linux forums, I am stuck in this issue. Every time I type "bitcoin-qt" on my terminal, it shows as a first download. Any help will be appreciate. Full story. English is not my first language, and this is being typed for second time (please have mercy on my grammar or misspelling mistakes), because I posted the question on linux subreddit nobody give a f..... so I decided to bring it here, posted a short post with the link and the automatic bot deleted because the of the link. I erased both the linux and the bitcoin post, and made a third one new, here, with plain text, copy pasting the info from the linux post. Never appeared on the "new" section of this sub. So hours of typing lost, and here we are. Old Notebook. 80gb drive, and noob to Linux. Although I have some pc and logic knowledge, installed MINT due to a recommendation from a Bitcoin community, but since I have a friend with an already running node, with Ubuntu switched to this one, just to have the same system. Once Ubuntu installed, on the 80gb and pc running, I copy and pasted the whole bitcoin folder from my friends pc to my 320 gb. Up to here all was good. But here is the problem My friend, who does not understand nothing about linux, is owner of a company and has an IT guy who made everything for him, but would not be willing to help me a lot, (just to be good with his boss but right now it is not reachable for me), but when we where on my pc he told me that Linux is very sensitive to ports, in other words, a small usb change, will do a program to loose the path for the files. SO, instead of using the 320gb disk on USB i installed on this notebook second Hdd bay (its an old high end laptop with 2 sata connectors), he was able to set the program and everything went well for a couple of hours, Bitcoin Core program started synchronizing, downloading very little info. I needed to turn of the pc to move it, so closed the program (waited until bitcoin core program told me was safe to) and turn it off, then turn it on again, and the problem was there, bitcoin core program started trying to download the whole blockchain in the spare 2gb of the 320 gb disk. So what it seemed to happen is that even when the disk is installed on a sata bay from the motherboard, as I did not installed ubunutu with this disk connected it's route (adress?) is dinamyc and that is why BTC Core Program lost the files and does not recognize it. After hours of google, linux forums and "askubuntu" i was able to, mount the 320gb disk, first editing the fstab ( i followed the guide in "askubuntu.com/questions/125257/how-do-i-add-an-additional-hard-drive") by the way. Trying to use VIM editor was a pain, it is REALLY difficult to type something there, and save it without pressing a wrong key. I had to cancel and start over at least a dozen times (plus reading several guides), but still was not able to mount the disk (Actually after following the steps, the hdd (320) disappeared from the GUI). went back, erased, and the did the NANO steps, and I THINK that now the hard drive it is fixed (before, any change,when restarting the second hdd took some time to appear, now it seems that is mounted and to a fixed adress). Well, after mounting the hdd, I tryed to call the bitcoin-qt and the initial download page appear and again tries to download from the initial block. I searched over hours "file association in ubuntu", "program files path" etc etc and the only thing I found is how to set up the desired software to open a file. For you to understand my mess, when I did the "user:user" thing, I did not understand completely what I was doing, (yes I had to be in sudo) BUT i think I managed to did the correct thing as both hdd are shown in the Ubuntu GUI. Some additional data is Both hard drives are formated in Ext4 I have (I think that) a fstab.bak before any changes I knwo that linux users sometimes ask for details on the system, just tell me the commands and i can run them to stick any info needed. Thanks for the help in advance.
Dear Groestlers, it goes without saying that 2020 has been a difficult time for millions of people worldwide. The groestlcoin team would like to take this opportunity to wish everyone our best to everyone coping with the direct and indirect effects of COVID-19. Let it bring out the best in us all and show that collectively, we can conquer anything. The centralised banks and our national governments are facing unprecedented times with interest rates worldwide dropping to record lows in places. Rest assured that this can only strengthen the fundamentals of all decentralised cryptocurrencies and the vision that was seeded with Satoshi's Bitcoin whitepaper over 10 years ago. Despite everything that has been thrown at us this year, the show must go on and the team will still progress and advance to continue the momentum that we have developed over the past 6 years. In addition to this, we'd like to remind you all that this is Groestlcoin's 6th Birthday release! In terms of price there have been some crazy highs and lows over the years (with highs of around $2.60 and lows of $0.000077!), but in terms of value– Groestlcoin just keeps getting more valuable! In these uncertain times, one thing remains clear – Groestlcoin will keep going and keep innovating regardless. On with what has been worked on and completed over the past few months.
UPDATED - Groestlcoin Core 2.18.2
This is a major release of Groestlcoin Core with many protocol level improvements and code optimizations, featuring the technical equivalent of Bitcoin v0.18.2 but with Groestlcoin-specific patches. On a general level, most of what is new is a new 'Groestlcoin-wallet' tool which is now distributed alongside Groestlcoin Core's other executables. NOTE: The 'Account' API has been removed from this version which was typically used in some tip bots. Please ensure you check the release notes from 2.17.2 for details on replacing this functionality.
Builds are now done through Gitian
Calls to getblocktemplate will fail if the segwit rule is not specified. Calling getblocktemplate without segwit specified is almost certainly a misconfiguration since doing so results in lower rewards for the miner. Failed calls will produce an error message describing how to enable the segwit rule.
A warning is printed if an unrecognized section name is used in the configuration file. Recognized sections are [test], [main], and [regtest].
Four new options are available for configuring the maximum number of messages that ZMQ will queue in memory (the "high water mark") before dropping additional messages. The default value is 1,000, the same as was used for previous releases.
The rpcallowip option can no longer be used to automatically listen on all network interfaces. Instead, the rpcbind parameter must be used to specify the IP addresses to listen on. Listening for RPC commands over a public network connection is insecure and should be disabled, so a warning is now printed if a user selects such a configuration. If you need to expose RPC in order to use a tool like Docker, ensure you only bind RPC to your localhost, e.g. docker run [...] -p 127.0.0.1:1441:1441 (this is an extra :1441 over the normal Docker port specification).
The rpcpassword option now causes a startup error if the password set in the configuration file contains a hash character (#), as it's ambiguous whether the hash character is meant for the password or as a comment.
The whitelistforcerelay option is used to relay transactions from whitelisted peers even when not accepted to the mempool. This option now defaults to being off, so that changes in policy and disconnect/ban behavior will not cause a node that is whitelisting another to be dropped by peers.
A new short about the JSON-RPC interface describes cases where the results of anRPC might contain inconsistencies between data sourced from differentsubsystems, such as wallet state and mempool state.
A new document introduces Groestlcoin Core's BIP174 interface, which is used to allow multiple programs to collaboratively work to create, sign, and broadcast new transactions. This is useful for offline (cold storage) wallets, multisig wallets, coinjoin implementations, and many other cases where two or more programs need to interact to generate a complete transaction.
The output script descriptor (https://github.com/groestlcoin/groestlcoin/blob/mastedoc/descriptors.md) documentation has been updated with information about new features in this still-developing language for describing the output scripts that a wallet or other program wants to receive notifications for, such as which addresses it wants to know received payments. The language is currently used in multiple new and updated RPCs described in these release notes and is expected to be adapted to other RPCs and to the underlying wallet structure.
A new --disable-bip70 option may be passed to ./configure to prevent Groestlcoin-Qt from being built with support for the BIP70 payment protocol or from linking libssl. As the payment protocol has exposed Groestlcoin Core to libssl vulnerabilities in the past, builders who don't need BIP70 support are encouraged to use this option to reduce their exposure to future vulnerabilities.
The minimum required version of Qt (when building the GUI) has been increased from 5.2 to 5.5.1 (the depends system provides 5.9.7)
getnodeaddresses returns peer addresses known to this node. It may be used to find nodes to connect to without using a DNS seeder.
listwalletdir returns a list of wallets in the wallet directory (either the default wallet directory or the directory configured bythe -walletdir parameter).
getrpcinfo returns runtime details of the RPC server. Currently, it returns an array of the currently active commands and how long they've been running.
deriveaddresses returns one or more addresses corresponding to an output descriptor.
getdescriptorinfo accepts a descriptor and returns information aboutit, including its computed checksum.
joinpsbts merges multiple distinct PSBTs into a single PSBT. The multiple PSBTs must have different inputs. The resulting PSBT will contain every input and output from all the PSBTs. Any signatures provided in any of the PSBTs will be dropped.
analyzepsbt examines a PSBT and provides information about what the PSBT contains and the next steps that need to be taken in order to complete the transaction. For each input of a PSBT, analyze psbt provides information about what information is missing for that input, including whether a UTXO needs to be provided, what pubkeys still need to be provided, which scripts need to be provided, and what signatures are still needed. Every input will also list which role is needed to complete that input, and analyzepsbt will also list the next role in general needed to complete the PSBT. analyzepsbt will also provide the estimated fee rate and estimated virtual size of the completed transaction if it has enough information to do so.
utxoupdatepsbt searches the set of Unspent Transaction Outputs (UTXOs) to find the outputs being spent by the partial transaction. PSBTs need to have the UTXOs being spent to be provided because the signing algorithm requires information from the UTXO being spent. For segwit inputs, only the UTXO itself is necessary. For non-segwit outputs, the entire previous transaction is needed so that signers can be sure that they are signing the correct thing. Unfortunately, because the UTXO set only contains UTXOs and not full transactions, utxoupdatepsbt will only add the UTXO for segwit inputs.
getpeerinfo now returns an additional minfeefilter field set to the peer's BIP133 fee filter. You can use this to detect that you have peers that are willing to accept transactions below the default minimum relay fee.
The mempool RPCs, such as getrawmempool with verbose=true, now return an additional "bip125-replaceable" value indicating whether thetransaction (or its unconfirmed ancestors) opts-in to asking nodes and miners to replace it with a higher-feerate transaction spending any of the same inputs.
settxfee previously silently ignored attempts to set the fee below the allowed minimums. It now prints a warning. The special value of"0" may still be used to request the minimum value.
getaddressinfo now provides an ischange field indicating whether the wallet used the address in a change output.
importmulti has been updated to support P2WSH, P2WPKH, P2SH-P2WPKH, and P2SH-P2WSH. Requests for P2WSH and P2SH-P2WSH accept an additional witnessscript parameter.
importmulti now returns an additional warnings field for each request with an array of strings explaining when fields are being ignored or are inconsistent, if there are any.
getaddressinfo now returns an additional solvable Boolean field when Groestlcoin Core knows enough about the address's scriptPubKey, optional redeemScript, and optional witnessScript for the wallet to be able to generate an unsigned input spending funds sent to that address.
The getaddressinfo, listunspent, and scantxoutset RPCs now return an additional desc field that contains an output descriptor containing all key paths and signing information for the address (except for the private key). The desc field is only returned for getaddressinfo and listunspent when the address is solvable.
importprivkey will preserve previously-set labels for addresses or public keys corresponding to the private key being imported. For example, if you imported a watch-only address with the label "coldwallet" in earlier releases of Groestlcoin Core, subsequently importing the private key would default to resetting the address's label to the default empty-string label (""). In this release, the previous label of "cold wallet" will be retained. If you optionally specify any label besides the default when calling importprivkey, the new label will be applied to the address.
getmininginfo now omits currentblockweight and currentblocktx when a block was never assembled via RPC on this node.
The getrawtransaction RPC & REST endpoints no longer check the unspent UTXO set for a transaction. The remaining behaviors are as follows:
If a blockhash is provided, check the corresponding block.
If no blockhash is provided, check the mempool.
If no blockhash is provided but txindex is enabled, also check txindex.
unloadwallet is now synchronous, meaning it will not return until the wallet is fully unloaded.
importmulti now supports importing of addresses from descriptors. A desc parameter can be provided instead of the "scriptPubKey" in are quest, as well as an optional range for ranged descriptors to specify the start and end of the range to import. Descriptors with key origin information imported through importmulti will have their key origin information stored in the wallet for use with creating PSBTs.
listunspent has been modified so that it also returns witnessScript, the witness script in the case of a P2WSH orP2SH-P2WSH output.
createwallet now has an optional blank argument that can be used to create a blank wallet. Blank wallets do not have any keys or HDseed. They cannot be opened in software older than 2.18.2. Once a blank wallet has a HD seed set (by using sethdseed) or private keys, scripts, addresses, and other watch only things have been imported, the wallet is no longer blank and can be opened in 2.17.2. Encrypting a blank wallet will also set a HD seed for it.
signrawtransaction is removed after being deprecated and hidden behind a special configuration option in version 2.17.2.
The 'account' API is removed after being deprecated in v2.17.2 The 'label' API was introduced in v2.17.2 as a replacement for accounts. See the release notes from v2.17.2 for a full description of the changes from the 'account' API to the 'label' API.
addwitnessaddress is removed after being deprecated in version 2.16.0.
generate is deprecated and will be fully removed in a subsequent major version. This RPC is only used for testing, but its implementation reached across multiple subsystems (wallet and mining), so it is being deprecated to simplify the wallet-node interface. Projects that are using generate for testing purposes should transition to using the generatetoaddress RPC, which does not require or use the wallet component. Calling generatetoaddress with an address returned by the getnewaddress RPC gives the same functionality as the old generate RPC. To continue using generate in this version, restart groestlcoind with the -deprecatedrpc=generate configuration option.
Be reminded that parts of the validateaddress command have been deprecated and moved to getaddressinfo. The following deprecated fields have moved to getaddressinfo: ismine, iswatchonly,script, hex, pubkeys, sigsrequired, pubkey, embedded,iscompressed, label, timestamp, hdkeypath, hdmasterkeyid.
The addresses field has been removed from the validateaddressand getaddressinfo RPC methods. This field was confusing since it referred to public keys using their P2PKH address. Clients should use the embedded.address field for P2SH or P2WSH wrapped addresses, and pubkeys for inspecting multisig participants.
A new /rest/blockhashbyheight/ endpoint is added for fetching the hash of the block in the current best blockchain based on its height (how many blocks it is after the Genesis Block).
A new Window menu is added alongside the existing File, Settings, and Help menus. Several items from the other menus that opened new windows have been moved to this new Window menu.
In the Send tab, the checkbox for "pay only the required fee" has been removed. Instead, the user can simply decrease the value in the Custom Fee rate field all the way down to the node's configured minimumrelay fee.
In the Overview tab, the watch-only balance will be the only balance shown if the wallet was created using the createwallet RPC and thedisable_private_keys parameter was set to true.
The launch-on-startup option is no longer available on macOS if compiled with macosx min version greater than 10.11 (useCXXFLAGS="-mmacosx-version-min=10.11" CFLAGS="-mmacosx-version-min=10.11" for setting the deployment sdkversion)
A new groestlcoin-wallet tool is now distributed alongside Groestlcoin Core's other executables. Without needing to use any RPCs, this tool can currently create a new wallet file or display some basic information about an existing wallet, such as whether the wallet is encrypted, whether it uses an HD seed, how many transactions it contains, and how many address book entries it has.
Since version 2.16.0, Groestlcoin Core's built-in wallet has defaulted to generating P2SH-wrapped segwit addresses when users want to receive payments. These addresses are backwards compatible with all widely used software. Starting with Groestlcoin Core 2.20.1 (expected about a year after 2.18.2), Groestlcoin Core will default to native segwitaddresses (bech32) that provide additional fee savings and other benefits. Currently, many wallets and services already support sending to bech32 addresses, and if the Groestlcoin Core project sees enough additional adoption, it will instead default to bech32 receiving addresses in Groestlcoin Core 2.19.1. P2SH-wrapped segwit addresses will continue to be provided if the user requests them in the GUI or by RPC, and anyone who doesn't want the update will be able to configure their default address type. (Similarly, pioneering users who want to change their default now may set the addresstype=bech32 configuration option in any Groestlcoin Core release from 2.16.0 up.)
BIP 61 reject messages are now deprecated. Reject messages have no use case on the P2P network and are only logged for debugging by most network nodes. Furthermore, they increase bandwidth and can be harmful for privacy and security. It has been possible to disable BIP 61 messages since v2.17.2 with the -enablebip61=0 option. BIP 61 messages will be disabled by default in a future version, before being removed entirely.
The submitblock RPC previously returned the reason a rejected block was invalid the first time it processed that block but returned a generic "duplicate" rejection message on subsequent occasions it processed the same block. It now always returns the fundamental reason for rejecting an invalid block and only returns "duplicate" for valid blocks it has already accepted.
A new submitheader RPC allows submitting block headers independently from their block. This is likely only useful for testing.
The signrawtransactionwithkey and signrawtransactionwithwallet RPCs have been modified so that they also optionally accept a witnessScript, the witness script in the case of a P2WSH orP2SH-P2WSH output. This is compatible with the change to listunspent.
For the walletprocesspsbt and walletcreatefundedpsbt RPCs, if thebip32derivs parameter is set to true but the key metadata for a public key has not been updated yet, then that key will have a derivation path as if it were just an independent key (i.e. no derivation path and its master fingerprint is itself).
The -usehd configuration option was removed in version 2.16.0 From that version onwards, all new wallets created are hierarchical deterministic wallets. This release makes specifying -usehd an invalid configuration option.
This release allows peers that your node automatically disconnected for misbehaviour (e.g. sending invalid data) to reconnect to your node if you have unused incoming connection slots. If your slots fill up, a misbehaving node will be disconnected to make room for nodes without a history of problems (unless the misbehaving node helps your node in some other way, such as by connecting to a part of the Internet from which you don't have many other peers). Previously, Groestlcoin Core banned the IP addresses of misbehaving peers for a period (default of 1 day); this was easily circumvented by attackers with multiple IP addresses. If you manually ban a peer, such as by using the setban RPC, all connections from that peer will still be rejected.
The key metadata will need to be upgraded the first time that the HDseed is available. For unencrypted wallets this will occur on wallet loading. For encrypted wallets this will occur the first time the wallet is unlocked.
Newly encrypted wallets will no longer require restarting the software. Instead such wallets will be completely unloaded and reloaded to achieve the same effect.
A sub-project of Bitcoin Core now provides Hardware Wallet Interaction (HWI) scripts that allow command-line users to use several popular hardware key management devices with Groestlcoin Core. See their project page for details.
This release changes the Random Number Generator (RNG) used from OpenSSL to Groestlcoin Core's own implementation, although entropy gathered by Groestlcoin Core is fed out to OpenSSL and then read back in when the program needs strong randomness. This moves Groestlcoin Core a little closer to no longer needing to depend on OpenSSL, a dependency that has caused security issues in the past. The new implementation gathers entropy from multiple sources, including from hardware supporting the rdseed CPU instruction.
On macOS, Groestlcoin Core now opts out of application CPU throttling ("app nap") during initial blockchain download, when catching up from over 100 blocks behind the current chain tip, or when reindexing chain data. This helps prevent these operations from taking an excessively long time because the operating system is attempting to conserve power.
How to Upgrade?
Windows If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), then run the installer. OSX If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), run the dmg and drag Groestlcoin Core to Applications. Ubuntu http://groestlcoin.org/forum/index.php?topic=441.0
ALL NEW - Groestlcoin Moonshine iOS/Android Wallet
Built with React Native, Moonshine utilizes Electrum-GRS's JSON-RPC methods to interact with the Groestlcoin network. GRS Moonshine's intended use is as a hot wallet. Meaning, your keys are only as safe as the device you install this wallet on. As with any hot wallet, please ensure that you keep only a small, responsible amount of Groestlcoin on it at any given time.
Groestlcoin Mainnet & Testnet supported
Multiple wallet support
Electrum - Support for both random and custom peers
Biometric + Pin authentication
Custom fee selection
Import mnemonic phrases via manual entry or scanning
BIP39 Passphrase functionality
Support for Segwit-compatible & legacy addresses in settings
Support individual private key sweeping
UTXO blacklisting - Accessible via the Transaction Detail view, this allows users to blacklist any utxo that they do not wish to include in their list of available utxo's when sending transactions. Blacklisting a utxo excludes its amount from the wallet's total balance.
Ability to Sign & Verify Messages
Support BitID for password-free authentication
Coin Control - This can be accessed from the Send Transaction view and basically allows users to select from a list of available UTXO's to include in their transaction.
HODL GRS connects directly to the Groestlcoin network using SPV mode and doesn't rely on servers that can be hacked or disabled. HODL GRS utilizes AES hardware encryption, app sandboxing, and the latest security features to protect users from malware, browser security holes, and even physical theft. Private keys are stored only in the secure enclave of the user's phone, inaccessible to anyone other than the user. Simplicity and ease-of-use is the core design principle of HODL GRS. A simple recovery phrase (which we call a Backup Recovery Key) is all that is needed to restore the user's wallet if they ever lose or replace their device. HODL GRS is deterministic, which means the user's balance and transaction history can be recovered just from the backup recovery key.
Simplified payment verification for fast mobile performance
Groestlcoin Seed Savior is a tool for recovering BIP39 seed phrases. This tool is meant to help users with recovering a slightly incorrect Groestlcoin mnemonic phrase (AKA backup or seed). You can enter an existing BIP39 mnemonic and get derived addresses in various formats. To find out if one of the suggested addresses is the right one, you can click on the suggested address to check the address' transaction history on a block explorer.
If a word is wrong, the tool will try to suggest the closest option.
If a word is missing or unknown, please type "?" instead and the tool will find all relevant options.
NOTE: NVidia GPU or any CPU only. AMD graphics cards will not work with this address generator. VanitySearch is a command-line Segwit-capable vanity Groestlcoin address generator. Add unique flair when you tell people to send Groestlcoin. Alternatively, VanitySearch can be used to generate random addresses offline. If you're tired of the random, cryptic addresses generated by regular groestlcoin clients, then VanitySearch is the right choice for you to create a more personalized address. VanitySearch is a groestlcoin address prefix finder. If you want to generate safe private keys, use the -s option to enter your passphrase which will be used for generating a base key as for BIP38 standard (VanitySearch.exe -s "My PassPhrase" FXPref). You can also use VanitySearch.exe -ps "My PassPhrase" which will add a crypto secure seed to your passphrase. VanitySearch may not compute a good grid size for your GPU, so try different values using -g option in order to get the best performances. If you want to use GPUs and CPUs together, you may have best performances by keeping one CPU core for handling GPU(s)/CPU exchanges (use -t option to set the number of CPU threads).
Fixed size arithmetic
Fast Modular Inversion (Delayed Right Shift 62 bits)
SecpK1 Fast modular multiplication (2 steps folding 512bits to 256bits using 64 bits digits)
Use some properties of elliptic curve to generate more keys
SSE Secure Hash Algorithm SHA256 and RIPEMD160 (CPU)
Groestlcoin EasyVanity 2020 is a windows app built from the ground-up and makes it easier than ever before to create your very own bespoke bech32 address(es) when whilst not connected to the internet. If you're tired of the random, cryptic bech32 addresses generated by regular Groestlcoin clients, then Groestlcoin EasyVanity2020 is the right choice for you to create a more personalised bech32 address. This 2020 version uses the new VanitySearch to generate not only legacy addresses (F prefix) but also Bech32 addresses (grs1 prefix).
Ability to continue finding keys after first one is found
Includes warning on start-up if connected to the internet
Ability to output keys to a text file (And shows button to open that directory)
Show and hide the private key with a simple toggle switch
Show full output of commands
Ability to choose between Processor (CPU) and Graphics Card (GPU) ( NVidia ONLY! )
Features both a Light and Dark Material Design-Style Themes
Free software - MIT. Anyone can audit the code.
Written in C# - The code is short, and easy to review.
Groestlcoin WPF is an alternative full node client with optional lightweight 'thin-client' mode based on WPF. Windows Presentation Foundation (WPF) is one of Microsoft's latest approaches to a GUI framework, used with the .NET framework. Its main advantages over the original Groestlcoin client include support for exporting blockchain.dat and including a lite wallet mode. This wallet was previously deprecated but has been brought back to life with modern standards.
Works via TOR or SOCKS5 proxy
Can use bootstrap.dat format as blockchain database
Import/Export blockchain to/from bootstrap.dat
Import wallet.dat from Groestlcoin-qt wallet
Export wallet to wallet.dat
Use both groestlcoin-wpf and groestlcoin-qt with the same addresses in parallel. When you send money from one program, the transaction will automatically be visible on the other wallet.
Rescan blockchain with a simple mouse click
Works as a full node and listens to port 1331 (listening port can be changed)
Fast Block verifying, parallel processing on multi-core CPUs
Mine Groestlcoins with your CPU by a simple mouse click
All private keys are kept encrypted on your local machine (or on a USB stick)
Lite - Has a lightweight "thin client" mode which does not require a new user to download the entire Groestlcoin chain and store it
Free and decentralised - Open Source under GNU license
Fixed Import/Export to wallet.dat
Rescan wallet option
Change wallet password option
Address type and Change type options through *.conf file
Import from bootstrap.dat - It is a flat, binary file containing Groestlcoin blockchain data, from the genesis block through a recent height. All versions automatically validate and import the file "grs.bootstrap.dat" in the GRS directory. Grs.bootstrap.dat is compatible with Qt wallet. GroestlCoin-Qt can load from it.
In Full mode file %APPDATA%\Groestlcoin-WPF\GRS\GRS.bootstrap.dat is full blockchain in standard bootstrap.dat format and can be used with other clients.
Groestlcoin Electrum Personal Server aims to make using Electrum Groestlcoin wallet more secure and more private. It makes it easy to connect your Electrum-GRS wallet to your own full node. It is an implementation of the Electrum-grs server protocol which fulfils the specific need of using the Electrum-grs wallet backed by a full node, but without the heavyweight server backend, for a single user. It allows the user to benefit from all Groestlcoin Core's resource-saving features like pruning, blocks only and disabled txindex. All Electrum-GRS's feature-richness like hardware wallet integration, multi-signature wallets, offline signing, seed recovery phrases, coin control and so on can still be used, but connected only to the user's own full node. Full node wallets are important in Groestlcoin because they are a big part of what makes the system be trust-less. No longer do people have to trust a financial institution like a bank or PayPal, they can run software on their own computers. If Groestlcoin is digital gold, then a full node wallet is your own personal goldsmith who checks for you that received payments are genuine. Full node wallets are also important for privacy. Using Electrum-GRS under default configuration requires it to send (hashes of) all your Groestlcoin addresses to some server. That server can then easily spy on your transactions. Full node wallets like Groestlcoin Electrum Personal Server would download the entire blockchain and scan it for the user's own addresses, and therefore don't reveal to anyone else which Groestlcoin addresses they are interested in. Groestlcoin Electrum Personal Server can also broadcast transactions through Tor which improves privacy by resisting traffic analysis for broadcasted transactions which can link the IP address of the user to the transaction. If enabled this would happen transparently whenever the user simply clicks "Send" on a transaction in Electrum-grs wallet. Note: Currently Groestlcoin Electrum Personal Server can only accept one connection at a time.
Use your own node
Uses less CPU and RAM than ElectrumX
Used intermittently rather than needing to be always-on
Doesn't require an index of every Groestlcoin address ever used like on ElectrumX
UPDATED – Android Wallet 7.38.1 - Main Net + Test Net
The app allows you to send and receive Groestlcoin on your device using QR codes and URI links. When using this app, please back up your wallet and email them to yourself! This will save your wallet in a password protected file. Then your coins can be retrieved even if you lose your phone.
Add confidence messages, helping users to understand the confidence state of their payments.
Handle edge case when restoring via an external app.
Count devices with a memory class of 128 MB as low ram.
Introduce dark mode on Android 10 devices.
Reduce memory usage of PIN-protected wallets.
Tapping on the app's version will reveal a checksum of the APK that was installed.
Fix issue with confirmation of transactions that empty your wallet.
Groestlcoin Sentinel is a great solution for anyone who wants the convenience and utility of a hot wallet for receiving payments directly into their cold storage (or hardware wallets). Sentinel accepts XPUB's, YPUB'S, ZPUB's and individual Groestlcoin address. Once added you will be able to view balances, view transactions, and (in the case of XPUB's, YPUB's and ZPUB's) deterministically generate addresses for that wallet. Groestlcoin Sentinel is a fork of Groestlcoin Samourai Wallet with all spending and transaction building code removed.
Storage space: I am using an 8 GB microSD card for the OS, and a 128 GB USB drive for data. Minimums I would recommend: 8GB SD card and 32 GB USB drive.
Reddcoin Core client version: v22.214.171.124-a8767ba-beta (most recent version at this moment). ↳ Screenshot
You need the OS; Lubuntu. Download Lubuntu (707 MB) for the Raspberry Pi: https://ubuntu-pi-flavour-maker.org/download/. It's a .torrent download, so you will need a BitTorrent client. Message me or post in this thread if you need help with this.
You need software to write the OS to the SD card. I use Etcher. Download Etcher: https://etcher.io/.
Select image: select the lubuntu-16.04.2-desktop-armhf-raspberry-pi.img.xz file.
Select drive: select your microSD card.
Plug the SD card into your Raspberry Pi and power it up.
Lubuntu should boot up.
Set up Lubuntu, connect to the internet (wired or wireless). ↳ As username, I chose "rpi3b". You will see this username throughout this whole tutorial.
Make sure date and time are correct ([Menu] > System Tools > Time and Date). ↳ Click on Unlock to make changes. I personally change Configuration to "Keep synchronized with Internet servers". ↳ Screenshot
Reboot ([Menu] > Logout > Reboot). I am connected to wifi, but have issues getting wifi to work on initial boot. A reboot solves this issue.
Make sure system is up-to-date, install never versions.
Open LXTerminal ([Menu] > System Tools > LXTerminal). ↳ Screenshot
Enter the following in LXTerminal: sudo apt update && sudo apt upgrade ↳ Screenshot
You will be asked if you really want to continue. Enter Y (yes).
Updates are being installed! Wait until it's finished.
Install programs that will be used in this tutorial.
GParted: to partition the USB drive.
Htop: to see the amount of memory (RAM) and swap that is in use.
Enter the following in LXTerminal to install these 2 programs. sudo apt install gparted && sudo apt install htop ↳ Screenshot
Create 2 partitions on the USB drive: 1) Swap partition 2) data partition (for the Reddcoin blockchain) The swap partition is necessary: The Reddcoin wallet can be memory intensive. To prevent any crashes or freezes, add 2 GB of 'virtual' memory by creating a swap partition.
Important: Backup your USB drive if needed. The USB drive will be formatted, so the data on the USB drive will be wiped.
Please use the USB drive solely for this purpose, do not combine it with other stuff.
Keep your USB drive plugged in, do not (randomly) plug it out.
Plug your USB drive in.
GParted will be used to create the partititons. Start GParted via LXTerminal: sudo gparted ↳ Screenshot
Apply the changes. Click on the check mark or select Edit > Apply All Operations. ↳ Screenshot ↳ Screenshot
Important: The name of the swap partition is needed later, so please write it down. Mine is /dev/sda1 (first partition on first drive (drive 'a')). ↳ Screenshot
Reboot. After the reboot, the data partition you just created should be visible on your desktop. ↳ Screenshot
The swap partition is created, so now we can enable and use it.
The swap in use can be monitored with the program Htop. Open Htop ([Menu] > System Tools > Htop) to see the 'Swp' (swap) in use. ↳ Screenshot By default, swap is not used, so 0K. ↳ Screenshot You can leave Htop open.
To enable the swap partition, open LXTerminal and enter the following commands: (Assuming /dev/sda1 is your swap partition.)
Unpack the file (large file, takes around 15 minutes to unpack): sudo xz -d bootstrap.dat.xz ↳ Screenshot
After a successful unpack, your will find the file bootstrap.dat in your USB root folder. ↳ Screenshot
On the first run of the Reddcoin Core client, it will ask for a data directory to store the blockchain and wallet data.
Start the Reddcoin Core client: sudo /media/rpi3b/usb/reddcoin/src/qt/reddcoin-qt ↳ Screenshot
The welcome screen will appear and ask you about the data directory. I suggest a new folder on your USB drive, I picked blockchain. The directory will be created with all the necessary files. ↳ Screenshot
Click on the three dots (...) on the right. ↳ Screenshot
Click on Create Folder at the upper right corner. Type and enter in the folder name. (In my case: blockchain.) Click on Open. ↳ Screenshot ↳ Screenshot ↳ Screenshot
After selecting the directory, the Reddcoin Core client will start. Wait till it's fully loaded and close it.
Move the bootstrap.dat file to your data directory you selected in the previous step. By doing this, Reddcoin Core will use the bootstrap.dat file to import the blockchain, which speeds up syncing. sudo mv bootstrap.dat /media/rpi3b/usb/blockchain/ (Assuming blockchain as data directory.) ↳ Screenshot
The Reddcoin Core client set up is completed, but you still have to sync fully with the blockchain before you can send, receive and stake.
Keep the client running until it's fully synchronized. It will use the bootstrap file first, and download the rest of the blockchain to complete the sync. This can take some time (it took 2 days for me). Syncing the blockchain uses a lot of resources, so the software may react slow.
You can see the progress in the debug window (Help > Debug window). ↳ Screenshot
When the synchronization is completed, the red (out of sync) will disappear on the Overview screen! ↳ Screenshot
When synchronization is complete, you can start staking your Reddcoins.
You can write down your private key or copy and save it in a document. Make sure you save it somewhere only you can access it.
To import later: Debug window -> Console -> importprivkey [label] [label] is optional. ↳ Screenshot (without a label) ↳ Screenshot (with a label)
Boot with only 1 USB drive plugged in: Make sure only the USB drive (with the swap partition and data partition) is plugged in when you boot up your Raspberry Pi. This to make sure the swap partition (/dev/sda1) is recognized correctly. If you boot up with multiple USB drives, Lubuntu might see the USB drive with the swap partition as the second drive (instead of the first drive), and ignore the 2 GB swap partition. If this happens, starting Reddcoin can render the Raspberry Pi unresponsive.
Start Reddcoin Core easier Run a shell script (.sh file), so you can start Reddcoin just by double clicking on an icon on your Desktop.
Right Click on your Desktop and select Create New -> Empty File. ↳ Screenshot
Enter a file name, make sure it ends with .sh, and click on OK. I've chosen for Reddcoin.sh. ↳ Screenshot The file will be created on your Desktop. ↳ Screenshot
Add the command to start Reddcoin to the file.
Right click on the file, select Leafpad (to open the file in a text editor). ↳ Screenshot
Add the following to the file and save the file: sudo /media/rpi3b/usb/reddcoin/src/qt/reddcoin-qt ↳ Screenshot
To be able to execute the shell script (.sh), it has to have 'execute permissions'.
Right click on the file, and select Properties. ↳ Screenshot
Click on the Permissions tab.
For Execute, select Anyone, and click on OK. ↳ Screenshot
To start Reddcoin Core, double click on the file. A new window will pop-up, asking you what you want. Execute in Terminal is what we want, so you can click on enter. ↳ Screenshot Reddcoin Core will now start. Do not close the Terminal window, you can minimize it if needed.
Minimization options Adjust minimization options, so you can safely press on the X button (the close/exit button on the upper right corner).
Activate 'Minimize on close'. Settings -> Options... -> Window (tab) -> Minimize on close. ↳ Screenshot Reddcoin will still run when you click on the X button. To close/exit Reddcoin, right click on the Reddcoin icon in the system tray (bottom right corner). ↳ Screenshot
RealVNC VNC Viewer (client) and VNC Connect (server): To remote connect to the Raspberry Pi, I use VNC Viewer ad VNC Connect from RealVNC.
After your download is finished, open the file and click Install Package. ↳ Screenshot
To run the VNC Connect once:
Open [Menu] > Run, and enter: vncserver-x11 ↳ Screenshot
To auto run on startup:
Open Default applications for LXSession ([Menu] > Preferences > Default applications for LXSession). ↳ Screenshot
In LXSessions configuration, select Autostart in the menu left.
Under Manual autostarted applications, enter vncserver-x11 and click on + Add. ↳ Screenshot ↳ Screenshot
Reboot your Raspberry Pi and check if VNC Connect is started automatically after the reboot.
When VNC Connect is running, you'll see a VNC icon on the right bottom corner. Double click the icon to open VNC Connect and to see the IP address you need to enter to connect to your Raspberry Pi. ↳ Screenshot
I want to stake Reddcoins on my Raspberry Pi, but there is no easy to install package for the Reddcoin Core client. I found some tutorials (mentioned at the bottom, under 'credits'), but I still struggled to get the result I wanted. It took some small adjustments, but I got the GUI Wallet of Reddcoin Core working on my Raspberry Pi Model 3B. See the steps below. :).
If you have any questions or comments, please post a comment in this thread, so others can also benefit from it.
If you would like to tip me: RqvdnNX5MTam855Y2Vudv7yVgtXdcYaQAW.
Even though Raspbian is the primary OS for the Raspberry Pi, it seems that it's not possible to build and compile the Reddcoin wallet software for Raspbian Stretch. However, I got the wallet compiled using Ubuntu MATE.
RPi: Raspberry Pi 3 Model B
OS: Ubuntu MATE 16.04.2 (Xenial)
Space needed: I would recommend at least 32 GB. I am using an 8 GB SD card for the OS, and a 128 GB USB drive for data.
The Reddcoin wallet can be memory intensive. To prevent any crashes or freezes, add 1 GB of 'virtual' memory by creating a swap file. After your Raspberry Pi has rebooted, open MATE Terminal again and enter the following commands:
sudo fallocate -l 1G /swapfile
sudo chmod 600 /swapfile
sudo mkswap /swapfile
sudo swapon /swapfile
To make sure the swap file persistent (so it survives a reboot), you have to add a line to the /etc/fstab file.
In MATE Terminal, enter the following command to open the file in Pluma (text editor): sudo pluma /etc/fstab
In Pluma, create a new line, add this text: /swapfile none swap sw 0 0 ↳ Screenshot (You should add spaces to vertically align the lines.)
Save and close the file.
Back to MATE Terminal; reboot your Pi: sudo reboot
To see if the swap file is used after a reboot, run: sudo cat /proc/swaps ↳ Screenshot
After the reboot, open MATE Terminal again. Download, unpack, configure, build and install Berkeley DB:
Add this line in Pluma: /uslocal/BerkeleyDB.4.8/lib/ ↳ Screenshot
Save and close the file.
Back in MATE Terminal: sudo ldconfig
Download the source of the Reddcoin wallet and build it:
git clone https://github.com/joroob/reddcoin
sudo ./configure --disable-tests
sudo make ↳ Screenshot (this will take some time; with me it took just over 1 hour)
sudo make install
Speed up synchronizing with the Reddcoin blockchain by bootstrapping.
cd (to make sure your working directory is your home directory)
Download the bootstrap file (1.45 GB): sudo wget https://github.com/reddcoin-project/reddcoin/releases/download/v126.96.36.199/bootstrap.dat.xz
Unpack the file: xz -d bootstrap.dat.xz
After a successful unpack, your will find the file ''bootstrap.dat'' in your home folder. ↳ Screenshot
On the first run of the Reddcoin Core client, it will ask for a data directory to store the blockchain and wallet data.
Start the Reddcoin Core client: sudo $HOME/reddcoin/src/qt/reddcoin-qt
The welcome screen will appear and ask you about the data directory. I suggest a new directory in your home directory, I picked 'blockchain'. The directory will be created with all the necessary files. ↳ Screenshot
After selecting the directory, the Reddcoin Core client will start. Wait till it's fully loaded and close it.
Use the file manager (Caja) to browse to your home directory and move the ''bootstrap.dat'' file to your data directory you selected in the previous step. Your home directory is the first item in the File Manager in the left menu.
The Reddit Core client set up is completed, but you still have to sync fully with the blockchain before you can send, receive and stake.
Launch the Reddcoin Core client again: sudo $HOME/reddcoin/src/qt/reddcoin-qt
Keep the client running until it's fully synchronized. This can take some time (it took 2 days for me).
You can see the progress in the debug window (Help > Debug window). ↳ Screenshot
When the synchronization is completed, the red (out of sync) will disappear on the Overview screen!
Your wallet will be encrypted, and the Reddcoin Core client will be closed. Launch the Reddcore Client again. ↳ Screenshot 4
To stake, you need to unlock your wallet (by entering your password): Settings > Unlock Wallet...
Make sure "For staking only" is checked before clicking OK. ↳ Screenshot
You can only stake with Reddcoins that have matured: coins have to be at least 8 hours in your wallet to mature.
The grey arrow at the bottom should be green when staking. Hover over that icon to see the progress of staking. ↳ Screenshot
Backup your wallet! File > Backup wallet... ↳ Screenshot
Start Reddit on system login. Settings > Options ↳ Screenshot > This works when using only an SD card. > I can't get this to work when using SD card (for OS) and a USB (for data/blockchain).
Adjust minimization options, so you can safely press on the red X (close/exit button). ↳ Screenshot
The default browser, Firefox, stops working and crashes after updating Ubuntu MATE. My solution is installing another browser: Chromium. To install Chromium, enter the following in MATE Terminal: sudo apt-get install chromium-browser ↳ Screenshot You can then access Chromium via [Menu] Applications > Internet. ↳ Screenshot
To remote connect to the Raspberry Pi, I use VNC Connect from RealVNC.
I am completely naive when it comes to Linux, coding, compiling, etc., so I found it difficult to follow advice I found for compiling the bitcoin diamond code form git. I followed a few guides for bitcoin core first and could never get it to work. I got some help from someone that knows Linux and here's what finally worked for me with BCD. Use rufus to make bootable usb with ubuntu iso. (https://rufus.akeo.ie/) Boot from the usb and install ubuntu. Follow this guide to compile bitcoin from git: https://www.toshblocks.com/bitcoin/compile-bitcoin-source-code-ubuntu-16-04-lts/ Do the entire guide with bitcoin core to ensure everything is working. Make sure you replace "theusername" with your own each time it appears, or make "theusername" your user name from the beginning. There was one small difference, at the end of the guide to run bitcoin-qt it is ./src/qt/bitcoin-qt At the end when trying to run bitcoin-qt (./src/bitcoin-qt) it said there was no such file, which made me think that I did something wrong but you just have to find where the file is. Hey, I said I was a complete noob, go easy on me. When you repeat the procedure for BCD there will be a few small changes: git clone https://github.com/bitcoin/bitcoin.git becomes git clone https://github.com/eveybcd/BitcoinDiamond.git mkdir bitcoin/db4/ becomes mkdir BitcoinDiamond/db4/ ../dist/configure --enable-cxx --disable-shared --with-pic --prefix=/home/theusername/bitcoin/db4/ becomes ../dist/configure --enable-cxx --disable-shared --with-pic --prefix=/home/theusername/BitcoinDiamond/db4/ ./configure LDFLAGS="-L/home/theusername/bitcoin/db4/lib/" CPPFLAGS="-I/home/theusername/bitcoin/db4/include/" becomes ./configure LDFLAGS="-L/home/theusername/BitcoinDiamond/db4/lib/" CPPFLAGS="-I/home/theusername/BitcoinDiamond/db4/include/" when you get to this line: [email protected]:~/BitcoinDiamond$ ./autogen.sh I got the following error: bash: ./autogen.sh: Permission denied this command will show some information about autogen.sh [email protected]:~/BitcoinDiamond$ ls -l autogen.sh -rw-rw-r-- 1 mmmmm mmmmm 527 Dec 30 21:26 autogen.sh same command comparing it to the bitcoin core version of autogen.sh $ ls -l ../bitcoin/autogen.sh -rwxrwxr-x 1 mmmmm mmmmm 527 Dec 30 21:03 ../bitcoin/autogen.sh do this to make them the same [email protected]:~/BitcoinDiamond$ chmod a+x autogen.sh recheck autogen.sh and it should match the bitcoin core autogen.sh now [email protected]:~/BitcoinDiamond$ ls -l autogen.sh -rwxrwxr-x 1 mmmmm mmmmm 527 Dec 30 21:26 autogen.sh continue on [email protected]:~/BitcoinDiamond$ ./autogen.sh [email protected]:~/BitcoinDiamond$ ./configure LDFLAGS="-L/home/mmmmm/BitcoinDiamond/db4/lib/" CPPFLAGS="-I/home/mmmmm/BitcoinDiamond/db4/include/" [email protected]:~/BitcoinDiamond$ make -s -j5 It will work a while and then you'll get the following error, among others: /bin/bash: ../share/genbuild.sh: Permission denied It's the same error as with autogen.sh, so find it and fix it by the following: [email protected]:~/BitcoinDiamond$ find . -name genbuild.sh ./share/genbuild.sh [email protected]:~/BitcoinDiamond$ chmod a+x ./share/genbuild.sh continue on by restarting make [email protected]:~/BitcoinDiamond$ make -s -j5 It should be good! go to and run bitcoin-qt to start the gui [email protected]:~/BitcoinDiamond/src$ cd qt [email protected]:~/BitcoinDiamond/src/qt$ ./bitcoin-qt bitcoin-wt will spend some hours syncing the entire blockchain so you have to wait. When it is finished, import private keys by: clicking in the "Bitcoin Core - Wallet" window to make it active hover mouse in top left of the grey bar on the top of the deskto screen, not the "Bitcoin Core - Wallet" until it says "file settings help" click on "help" click on "Debug Window" click on the "Console" tab enter "importprivkey 5KJvsngHeMpm884wtkJNzQGaCErckhHJBGFsvd3VyK5qMZXj3hS" with your own key make an account at gate.io where they are allowing deposits sell!, or don't, maybe you're nuts, who am I to judge
Running staking Lore clients paves the way for some of the future use cases of BLK utilising the Bitcoin 0.12 (and newer) core tech, including colored coins. So I'm going to leave this one going indefinitely to kickstart the number of Lore clients staking. It's certainly not mandatory but it will be good in the longer term to have a nice distribution of Lore staking clients.
The cross-compile which lets you create binaries for multiple platforms didn't work for the QT version on the Pi, so there is more to do than just running the binary unfortunately, as below. There are folks working on some much cleaner solutions than this for the Pi, with a custom front end, and where you won't have to do any mucking about. That is coming soon. In the meantime, if you enjoy a fiddle with such things, here's how to get this QT client working on your Pi.
These instructions assume you are starting from scratch with a completely blank OS.
Note they have since (August 2017) released a version called 'Stretch' which does not work with this guide. I'll see if I can come up with something new for that at some point and link to it here when I have. In the meantime the guide should work with the Jessie image above.
Unzip the file and extract the .img file to burn it onto Fresh SD card to boot from (to be safe, use 16GB or larger), using a tool like win32diskimager or Etcher.
Assuming you have keyboard/mouse and monitor plugged into your pi, boot it up and the Jessie Desktop will show.
Before we do anything else, you should increase the default swap size on the pi, as compiling certain libraries can exhaust the RAM and get stuck otherwise. To do this, launch a Terminal window and type:
sudo nano /etc/dphys-swapfile
and Change the CONF_SWAPSIZE from 100 to:
Exit nano with control + x to write out the file.
Then, run the following to restart the swapfile manager:
(If you prefer to compile it yourself instead, it is possible by following the instructions in the original article by Mindphuk just taking into account this is the newer version of the Lore client than when that was written (https://github.com/janko33bd/bitcoin/releases) and the versions of Boost and the Berkeley DB need to be the same as below.)
Double click the zip and extract the Lore binary files. Yes, at the moment they are all called 'bitcoin', not 'blackcoin' or 'Lore' - this is because the code derives from a recent bitcoin core implementation so this has not yet been updated. You can place these wherever you like.
In the Terminal window, change directory to where you put the binaries, e.g.:
cd Downloads/lore-raspberrypi-armv7-jessie-pixel chmod +x *
That marks the binaries as executable.
Now, we need the Boost libraries installed for any of the Lore binaries to work. The project was done with Boost 1.62.0. Unfortunately the Jessie repository only goes up to 1.55, so we need to download and build 1.62 manually on the device.
wget https://sourceforge.net/projects/boost/files/boost/1.62.0/boost_1_62_0.tar.gz/download tar -xvzf download cd boost_1_62_0 sudo ./bootstrap.sh sudo ./b2 install
(This will take almost 2 hours. Have a nice cup of tea and a sit down.)
When I came to run the binaries, I found they couldn't find Boost. Running this command fixes that:
Now we are going to install the packages which aren't already included in the default OS installation which the binaries need in order to run:
Place the bootstrap.dat file into the ~/.lore directory.
Run ./bitcoin-qt again, it will say 'Importing Blocks' rather than 'Synchronising with Network'. My pi sync'ed fully in about 5-6 hours.
If you want peace of mind that Lore will always start on bootup into the Jessie w/Pixel desktop (i.e. after a power cycle), then you need to create a .desktop file in the following place.
sudo nano ~/.config/autostart/Lore.desktop
And in it, enter the following (tailoring the Exec line below to the whereabouts of your bitcoin-qt file):
[Desktop Entry] Name=Blackcoin Lore Comment=Mining without the waste Exec=/home/pi/Downloads/lore-raspberrypi-armv7-jessie-pixel/bitcoin-qt Type=Application Encoding=UTF-8 Terminal=false Categories=None;
Power usage and payback time
After a good while leaving it going by itself, the CPU load averages got down to almost zero, all of the time. Idling, the Pi uses a bit less than 3 watts. This means it would take two weeks to use one 1Kw/h of electricity.
If you pay e.g. 12.5 cents a unit, that's what you'd expect this to cost to run in a fortnight. That's around $0.25 a month or $3 a year. Green and cheap and helping to secure the BLK network. I paid for the year's worth of electricity in 2 days staking with 25k BLK. Makes mining look silly, huh? ;)
Securing your Pi
With staking, your wallet needs to be unlocked and as such, the keys to your wallet are on the device. In a clean and newly installed environment as described above, and if you don't allow others to use your device and there is no other software or nasties running on it, there is no real cause for concern. However, there are some basic security precautions you can take.
Firstly, if you have enabled SSH and are playing with your pi across your LAN (or worse, the Internet), you should immediately change the password for the default 'pi' user (which is preconfigured to be 'raspberry'). Simply log in as normal, then type:
You'll be prompted to enter the old and the new passwords.
Security by default
Your Pi is likely, by default, to not be exposed to incoming connections from the outside world because your router is likely generating a private address range for your LAN (192.168.x.x or 10.0.x.x or 172.x.x.x) which means all incoming connections are effectively blocked at the router anyway unless you set up a 'port forward' record to allow packets arriving on certain ports to be forwarded to a specific internal IP address.
As for accessing your Pi across the internet, if you have set up a port forward, this likely has security ramifications. Even basic old fashioned protocols have proven in recent times to have uncaught flaws, so it's always advisable to lock down your device as much as possible, and even if you only plan to access the Pi over your LAN, install a firewall to configure this. I used one called ufw, because it's literally an uncomplicated firewall.
sudo apt-get install ufw sudo ufw allow from 192.168.0.0/16 to any port 22 sudo ufw --force enable
This allows just port 22 (SSH) to be open on the Pi to any device on my LAN's subnet (192.168.0.x). You can change the above to a single IP address if paranoid, or add several lines, if you want to lock it down to your LAN and a specific external static IP address (e.g. a VPN service you use). To find out what subnet your router uses, just type:
and you'll see on the interface you are using (either hard wired or wifi) the 192.168 or 10. or 172. prefix. Change the above rule so it matches the first two octets correctly (e.g. 10.0.0.0/16 if you're on a 10.0. address).
You may already use VNC to access your Pi's desktop across your LAN, this uses port 5900. Add a line like above to lock it down to an internal address. It's not a good idea to expose this port to the wider world because those connections are not encrypted and potentially could be subjected to a MITM attack.
You can query the status of the firewall like this:
And of course, try connecting remotely once you change the rules to see what works. You should consult the official documentation for further options: https://help.ubuntu.com/community/UFW
Back up & Recovery
There are again many ways to tackle this so I'll just speak about my basic precautions in this regard. Don't take it as a be-all-and-end-all!
The wallet.dat file is the key file (literally) containing all the private/public keys and transactions. This can be found in:
You can navigate there using Jessie w/Pixel's own file manager or in a terminal window (cd ~/.lore). You can copy this file or, if you'd rather keep a plain text file of all your public and private keys, use the 'dumpwallet' command in the console. In Lore, go to Help > Debug Window > Console and type 'dumpwallet myfilename' where myfilename is the file you want it to spit out with all your keys in it. This file will end up in the same place you launch bitcoin-qt from.
The instructions earlier on, when running Lore for the first time intentionally left out encrypting your wallet.dat file because in order for the wallet to stake upon startup, it needs to have a decrypted key already. This isn't perfect, but after a power cycle, it would never stake unless you left it decrypted. So the best practice here is as soon as the wallet.dat file has left your device, i.e. you copy it to a USB stick for example, put it in an encrypted folder or drive (or both).
On the Mac, I use a software package called Concealer to encrypt files I store on the Mac itself: http://www.belightsoft.com/products/conceale There are almost certainly free packages with similar functionality, I have just used that one for years.
Note that these disk encryption methods may mean having to access the USB stick on a PC or Mac in order to retrieve the files in the event of a disaster. Be aware this may mean exposing them to more security issues if your computer is in any way compromised or someone nefarious has access to your computer. There are more 'manual' ways of backing up and recovering, such as literally writing down private/public key pairs which this guide doesn't go into, but may suit you better if paranoid about your setup.
The wallet.dat file has everything in it you need to recover your wallet, or if you used 'dumpwallet', the file you saved out has all the keys.
Wallet.dat method: Install Lore as normal then replace any auto-generated wallet.dat in ~/.lore directory with your backup. If a lot of time has elapsed and many transactions have occurred since your backup, launch lore with:
And if that doesn't do the job, do a full reindex of the blockchain:
If you used the dumpwallet command, install Lore then place the file containing all the keys that you saved out in the same directory as bitcoin-qt. In Lore, go to Help > Debug Window > Console and type 'importwallet myfilename' where myfilename is that file containing all the keys. The wallet should automatically rescan for transactions at that point and you should be good to go.
There are a million ways to do effective security and disaster recovery, but I hope this shows you a couple of basic precautionary ways. There are discussions about better ways to stake without compromising too much security which are happening all the time and developments in this regard will happen in time.
In the meantime, feel free to comment with your best practices.
How I started running a v.15.0 node for less than 60 USD. (Less than any raspberry pi setup I have seen.)
Hey, I want to share this easy way to start a full-time node. I chose to run a full-time node on an independent device for security, and because my laptop is not on a wired connection enough to benefit the network. Also, I felt the need to better understand the role nodes play in Bitcoin security, and how they operate. So I decided to actually explore the technology, and familiarize myself with some of the basics by setting up a Bitcoin Core v.15.0 full node.
Once syncing is complete check to see that more than 8 connections establish after a few minutes running. Greater than 8 means you have in-bound connections that allows you to serve historic blocks to other nodes, and other necessary communications for a full-node. You can also just check to see if port 8333 is open.
I will admit, I had some problems opening the qt file after extracting it. Not sure if I was missing something or Lubuntu was missing something. Regardless, I just compiled it in command line without any problems.
Why is installing peercoin qt in linux live session so hard?
Hi, I'm trying to do a USB Live Session fresh install on my OSX comp, using ubuntu 12.04. I want to install the peercoin client offline to generate an offline wallet which can then be encrypted and moved to a USB key, and later imported to peercoin on my Mac when I want to spend the coins. My question is whether or not I have to connect to the Internet in the liveUSB to actually do this successfully? Because I'm having an amazing amount of trouble doing this (nights and nights of frustration) when I'm not connecting to the internet. In general I don't think that I'm technically disinclined, but this is absolutely stumped me. I'll outline my steps that I've done so far. 1- I've made the USB system and can boot no problem. I always choose to "test ubuntu without installing" since when I tried installing it wanted to overwrite my OSX 2- I unpack the tar.gz and I can't actually follow the install instructions coming with Peercoin (ppcoin-0.3.0-linux.tar.gz is the file I downloaded) below:
First, make sure that the required packages for Qt4 development of your distribution are installed, for Debian and Ubuntu these are: apt-get install qt4-qmake libqt4-dev build-essential libboost-dev libboost-system-dev \ libboost-filesystem-dev libboost-program-options-dev libboost-thread-dev \ libssl-dev libdb4.8++-dev then execute the following: qmake make Alternatively, install Qt Creator and open the `bitcoin-qt.pro` file.
I cant install the required packages in order to unpack everything. All of the threads I read about detail steps AFTER installing, so it seems like I just am braindead and can't even get to the point others start to have difficulty. I also cannot install a QT creator, which the system suggests I try to do to create a graphical user interface. I've also followed the instructions here, as to how to install QT creator, but to absolutely no avail. The command line either says there is no file, or nothing happens. I followed the instructions here, as to how to unpack a file with a .bin extension but when I do that nothing happens either. I guess my question is, why is this so hard for me? Everything that I read suggest that the best kind of off-line wallet is done on a system that is never connected to the Internet. But if I can't install anything without connecting to the Internet, how can I get to the point where I can even generate a Wallet? This link on github suggests I should be connected to the internet Is anybody aware of an ultra descriptive linux/ubuntu 12.04 fresh install set of instructions? Something like this I think would be incredibly valuable to the community, and if I ever figure it out on my own, I will absolutely make it. I feel like this is limiting me from getting completely set up with peercoin. I can just generate private keys offline (I think, honestly I haven't tried running the html files I've downloaded because I'm fighting with ubuntu (bitaddress.org, brainwallet.org, etc)). But since I am using OS X, there doesn't appear for me to be any way to actually import a generated private key/address at this point into the OSX peercoin client to generate a new wallet. Is there? Any help is very very appreciated, thanks very much. Also, should I double post this at peercointalk.org? I'm more familiar with Reddit :) *edit 1 - fixed formatting
Sure Bitcoin is safe Grandma. This is all you have to do to really secure your money
THIS IS FUCKED. BITCOIN HAS NO FUTURE IF WE CAN'T FIND A BETTER WAY TO MAKE IT SECURE. MAIN STREET WILL RUN A MILE FROM IT. Xpost from: http://www.reddit.com/Bitcoin/comments/1d26gw/cold_storage_how_i_did_it/ With the recent events surrounding blockchain.info wallet attacks, I decided to bite the bullet and send all my coins to my cold wallet. It's a bit nerve wrecking but I managed. Here's what I did: Download offline version of Armory here (section Linux – Offline Bundle for Ubuntu 10.04) Download Brainwallet source from github for signing transactions, rather than the suggested way from armory website, since I don't want to run a full Bitcoin-qt client + armory to create an unsigned tx. More on this later Prepare a USB pendrive for linux here using the suggested Ubuntu 10.04 by Armory. Boot into Linux using that pendrive. Install the Armory software and generate a new wallet. Make sure you make appropriate backup (paper copy or just write down the seed). You can always regenerate your entire wallet via brainwallet.org copy (tab Chains). If you want, make a watch only copy of your wallet, and you can get all the public address in that wallet from your online computer via Armory offline version. Save the watch only wallet on your windows partition. Reboot into windows/mac/your main OS. Install armory and import the watch only wallet to see all of your addresses. Try to move a small fund into one of the cold-storage addresses. Wait for it to have 6 confirmations. Then we can try to spend that fund by doing the following: Get unspent output from your cold-storage address: https://blockchain.info/unspent?address= Copy the output into a text file, leave it on your windows machine. Linux copy will be able to read this file. Boot back into linux on your pendrive. Use saved brainwallet.org website to sign that transaction (use tab Transaction) by pasting the private key of the address (get from Armory, without space) and the unspent output. Sign the message. Then save the output to the same txt file. Boot back into your main OS. Paste that signed output to http://blockchain.info/pushtx and push it. You're good to go. You spent your fund in your cold storage. Now, move everything you have from your online storage there.
Hey guys, I'm currently using Bitcoin-qt on my Windows 7 hard drive. Although I have very little coin, I'm thinking about moving my coin to a more secure place. I have a spare 2.5" 250GB WD Black from an old laptop and a 32GB Sandisk Ultra USB 3 stick. From what I've read of other people doing, I was considering installing Ubuntu on one of the drives and moving the little cash I have over to a wallet on there, such as Armoury or Electrum disconnected from the net (although I have no experience using these wallets). Then booting into the drive whenever I want to move any coin. I don't really understand the whole private key thing and the security issues regarding the blockchain. Would this be a secure way of doing things, and is it the way people would recommend?? Would someone have any tips / basic guides on how to securely create a wallet in Ubuntu that maybe I could monitor without booting it up, and are there any security concerns or best practices I need to be aware of? Many thanks!
Question about Electrum offline wallet on a live USB
So I thought I'd try out Electrum instead of using the core bitcoin client. I read these instructions on how to create an offline Electrum wallet on a bootable ubuntu USB. In the instructions it says to leave the persistence to 'Live Mode' when creating the USB, but later on after installing python-QT and Electrum you have to reboot the USB on an offline computer. Don't you kinda need the persistence setting on to keep those things installed on the live USB after shutting down? (I'm a linux noob - please forgive my ignorance). Also I'm guessing unplugging my Windows pc's ethernet cable when running Electrum for the first time (booted from the ubuntu live USB) isn't enough security wise? Or maybe it is ok as long as this copy of Electrum won't be used online anymore? (again, I've never used Electrum before so this offline/online use is still taking time to sink in). Any advice/assurance appreciated :)
Drag the Bitcoin icon to the desired install location, and double-click the icon to run the application. Initialization. The Bitcoin window will open and connections will start up in minutes. The blocks will begin downloading. At this point, it is recommended to encrypt your wallet before receiving any bitcoins. Encrypting later may leave ... We’re going to run the GUI version first, called bitcoin-qt, then we’ll exit it and run the non-GUI version called bitcoind, and then back to bitcoin-qt, with some steps and configuration in between so you can understand what’s really happening and feel comfortable starting and stopping the software when you need to. The objective is to download, verify and install Electrum Bitcoin wallet on Ubuntu 18.04 Bionic Beaver Linux Desktop Operating System and Software Versions. Operating System: - Ubuntu 18.04 Bionic Beaver; Software: - Electrum 3.0.6 or higher; Requirements Privileged access to your Ubuntu System as root or via sudo command is required. Difficulty EASY Conventions # - requires given linux ... The Bitcoin Core daemon (bitcoind) is not included in the .dmg file you may have downloaded to install Bitcoin-QT. Bitcoind, along with its support binaries, is instead included in the OS X .tar.gz file listed on the official Bitcoin Core download page. To download this file using Terminal, execute the following command: Bitcoin-Qt ist ein Open-Source-Projekt und derzeit einer der sichersten Vertreter unter den Mining-Clients. Hier müssen Sie sich nicht um eventuelle Angriffe auf Ihr virtuelles Geld sorgen. Ebenfalls Open-Source und vertrauenswürdig ist Electrum.Das Tool punktet mit einer 2-Faktor-Authentifizierung, dem Support von Add-ons und der Möglichkeit, Ihre Keys jederzeit in andere Bitcoin-Clients ...
sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update sudo apt-get install bitcoin-qt bitcoind Linux terminal new stuff: clear, ll, cd, touch, echo, cat, shutdown www.bitcoinhackers.org How to install Bitcoin on Ubuntu 16.04 On this video, I will show you how to install Bitcoin on Ubuntu 16.04 Commands sudo apt-add-repository ppa:bitcoin/bi... How to install ASICMiner Block Erupter CGMINER USB Setup/ Tutorial Ubuntu. Install Qt on ubuntu serwer without gui. ... install ubuntu on eSXi - Duration: 15:45. Jason Chubb 9,336 views. 15:45. Install Ubuntu Linux using a bootable USB Flash Drive on any Computer ... This video covers the method to install BitCoins on Ubuntu 16.04 Bitcoin is a virtual and crypto-currency created by Satoshi Nakamoto. For more explanation o...