Bitcoin Halving Is Only 2 Months Away How Will It Affect ...

[ANN][ANDROID MINING][AIRDROP] NewEnglandcoin: Scrypt RandomSpike

New England
New England 6 States Songs:
Symbol: NENG
NewEnglandcoin is a clone of Bitcoin using scrypt as a proof-of-work algorithm with enhanced features to protect against 51% attack and decentralize on mining to allow diversified mining rigs across CPUs, GPUs, ASICs and Android phones.
Mining Algorithm: Scrypt with RandomSpike. RandomSpike is 3rd generation of Dynamic Difficulty (DynDiff) algorithm on top of scrypt.
1 minute block targets base difficulty reset: every 1440 blocks subsidy halves in 2.1m blocks (~ 2 to 4 years) 84,000,000,000 total maximum NENG 20000 NENG per block Pre-mine: 1% - reserved for dev fund ICO: None RPCPort: 6376 Port: 6377
NewEnglandcoin has dogecoin like supply at 84 billion maximum NENG. This huge supply insures that NENG is suitable for retail transactions and daily use. The inflation schedule of NengEnglandcoin is actually identical to that of Litecoin. Bitcoin and Litecoin are already proven to be great long term store of value. The Litecoin-like NENG inflation schedule will make NewEnglandcoin ideal for long term investment appreciation as the supply is limited and capped at a fixed number
Bitcoin Fork - Suitable for Home Hobbyists
NewEnglandcoin core wallet continues to maintain version tag of "Satoshi v0.8.7.5" because NewEnglandcoin is very much an exact clone of bitcoin plus some mining feature changes with DynDiff algorithm. NewEnglandcoin is very suitable as lite version of bitcoin for educational purpose on desktop mining, full node running and bitcoin programming using bitcoin-json APIs.
The NewEnglandcoin (NENG) mining algorithm original upgrade ideas were mainly designed for decentralization of mining rigs on scrypt, which is same algo as litecoin/dogecoin. The way it is going now is that NENG is very suitable for bitcoin/litecoin/dogecoin hobbyists who can not , will not spend huge money to run noisy ASIC/GPU mining equipments, but still want to mine NENG at home with quiet simple CPU/GPU or with a cheap ASIC like FutureBit Moonlander 2 USB or Apollo pod on solo mining setup to obtain very decent profitable results. NENG allows bitcoin litecoin hobbyists to experience full node running, solo mining, CPU/GPU/ASIC for a fun experience at home at cheap cost without breaking bank on equipment or electricity.
MIT Free Course - 23 lectures about Bitcoin, Blockchain and Finance (Fall,2018)
CPU Minable Coin Because of dynamic difficulty algorithm on top of scrypt, NewEnglandcoin is CPU Minable. Users can easily set up full node for mining at Home PC or Mac using our dedicated cheetah software.
Research on the first forked 50 blocks on v1.2.0 core confirmed that ASIC/GPU miners mined 66% of 50 blocks, CPU miners mined the remaining 34%.
NENG v1.4.0 release enabled CPU mining inside android phones.
Youtube Video Tutorial
How to CPU Mine NewEnglandcoin (NENG) in Windows 10 Part 1 How to CPU Mine NewEnglandcoin (NENG) in Windows 10 Part 2
How to CPU Mine NewEnglandcoin (NENG) in macOS
Decentralization and Community Driven NewEnglandcoin is a decentralized coin just like bitcoin. There is no boss on NewEnglandcoin. Nobody nor the dev owns NENG.
We know a coin is worth nothing if there is no backing from community. Therefore, we as dev do not intend to make decision on this coin solely by ourselves. It is our expectation that NewEnglandcoin community will make majority of decisions on direction of this coin from now on. We as dev merely view our-self as coin creater and technical support of this coin while providing NENG a permanent home at ShorelineCrypto Exchange.
Twitter Airdrop
Follow NENG twitter and receive 100,000 NENG on Twitter Airdrop to up to 1000 winners
Graphic Redesign Bounty
Top one award: 90.9 million NENG Top 10 Winners: 500,000 NENG / person Event Timing: March 25, 2019 - Present Event Address: NewEnglandcoin DISCORD at:
Please complete above Twitter Bounty requirement first. Then follow Below Steps to qualify for the Bounty: (1) Required: submit your own designed NENG logo picture in gif, png jpg or any other common graphic file format into DISCORD "bounty-submission" board (2) Optional: submit a second graphic for logo or any other marketing purposes into "bounty-submission" board. (3) Complete below form.
Please limit your submission to no more than two total. Delete any wrongly submitted or undesired graphics in the board. Contact DISCORD u/honglu69#5911 or u/krypton#6139 if you have any issues.
Twitter Airdrop/Graphic Redesign bounty sign up:
NENG v1.4.0 Android Mining, randomSpike Evaluation
RandomSpike - NENG core v1.3.0 Hardfork Upgrade Proposal
NENG Security, Decentralization & Valuation
Whitepaper v1.0
Step by step guide on how to setup an explorer:
Android with UserLand App (arm64/armhf), Chromebook (x64/arm64/armhf):
Linux Wallet (Ubuntu/Linux Mint, Debian/MX Linux, Arch/Manjaro, Fedora, openSUSE):
MacOS Wallet (10.11 El Capitan or higher):
Android with GNUroot on 32 bits old Phones (alpha release) wallet:
Windows wallet:
addnode ip address for the wallet to sync faster, frequently updated conf file:
How to Sync Full Node Desktop Wallet
Cheetah CPU Miner Software
Solo Mining with GPU or ASIC
How to Run Two Full Node in Same Desktop PC
ASIC/GPU Mining Pools Warning to Big ASIC Miners Due to DynDiff Algo on top of Scrypt, solo mining is recommended for ASIC/GPU miners. Further more, even for mining pools, small mining pool will generate better performance than big NENG mining pool because of new algo v1.2.x post hard fork.
The set up configuration of NENG for scrypt pool mining is same as a typical normal scrypt coin. In other word, DynDiff on Scrypt algo is backward compatible with Scrypt algo. Because ASIC/GPU miners rely on CPU miners for smooth blockchain movement, checkout bottom of "Latest News" section for A WARNING to All ASIC miners before you decide to dump big ASIC hash rate into NENG mining.
(1) Original DynDiff Warning: (2) New Warning on RandomSpike Spike difficulty (244k) introduced in RandomSpike served as roadblocks to instant mining and provide security against 51% attack risk. However, this spike difficulty like a roadblock that makes big ASIC mining less profitable. In case of spike block to be mined, the spike difficulty immediately serve as base difficulty, which will block GPU/ASIC miners effectively and leave CPU cheetah solo miners dominating mining almost 100% until next base difficulty reset.
Cminors' Pool
Features: anonymous sign up and trading. No restriction or limit on deposit or withdraw.
The trading pairs available: NewEnglandcoin (NENG) / Dogecoin (DOGE)
Trading commission: A round trip trading will incur 0.10% trading fees in average. Fees are paid only on buyer side. buy fee: 0.2% / sell fee: 0% Deposit fees: free for all coins Withdraw fees: ZERO per withdraw. Mining fees are appointed by each coin blockchain. To cover the blockchain mining fees, there is minimum balance per coin per account: * Dogecoin 2 DOGE * NewEnglandcoin 1 NENG
Latest News Aug 30, 2020 - NENG v1.4.0.5 Released for Android/Chromebook Upgrade with armhf, better hardware support
Aug 11, 2020 - NENG v1.4.0.4 Released for Android arm64 Upgrade / Chromebook Support
Jul 30, 2020 - NENG v1.4.0.3 Released for Linux Wallet Upgrade with 8 Distros
Jul 21, 2020 - NENG v1.4.0.2 Released for MacOS Upgrade with Catalina
Jul 19, 2020 - NENG v1.4.0.1 Released for MacOS Wallet Upgrade
Jul 15, 2020 - NENG v1.4.0 Released for Android Mining, Ubuntu 20.04 support
Jul 11, 2020 - NENG v1.4.0 Android Mining, randomSpike Evaluation
Jun 27, 2020 - Pre-Announce: NENG v1.4.0 Proposal for Mobile Miner Upgrade, Android Mining Start in July 2020
Jun 19, 2020 - Best Practice for Futurebit Moonlander2 USB ASIC on solo mining mode
Mar 15, 2020 - Scrypt RandomSpike - NENG v1.3.0.1 Released for better wallet syncing
Feb 23, 2020 - Scrypt RandomSpike - NENG Core v1.3.0 Relased, Hardfork on Mar 1
Feb 1, 2020 - Scrypt RandomSpike Proposal Published- NENG 1.3.0 Hardfork
Jan 15, 2020 - NewEnglandcoin Dev Team Expanded with New Kickoff
Jan 12, 2020 - Explanation of Base Diff Reset and Effect of Supply
Dec 19, 2019 - Shoreline_tradingbot version 1.0 is released
Sept 1, 2019 - NewEnglandcoin (NENG) is Selected as Shoreline Tradingbot First Supported Coin
Aug 15, 2019 - Mining Update on Effect of Base Difficulty Reset, GPU vs ASIC
Jul 7, 2019 - CPU Mining on macOS Mojave is supported under latest Cheetah_Cpuminer Release
Jun 1, 2019 - NENG Fiat project is stopped by Square, Inc
Apr 21, 2019 - NENG Fiat Project is Launched by ShorelineCrypto
Apr 7, 2019 - Announcement of Fiat Project for all U.S. Residents & Mobile Miner Project Initiation
Apr 1, 2019 - Disclosure on Large Buying on NENG at ShorelineCrypto Exchange
Mar 27, 2019 - Disclosure on Large Buying on NENG at ShorelineCrypto Exchange
Mar 17, 2019 - Disclosure on Large Buying on NENG at ShorelineCrypto Exchange
Feb 26, 2019 - Community Project - NewEnglandcoin Graphic Redesign Bounty Initiated
Feb 22, 2019 - Dev Policy on Checkpoints on NewEnglandcoin
Feb 20, 2019 - NewEnglandCoin v1.2.1 Released to Secure the Hard Kork
Feb 11, 2019 - NewEnglandCoin v1.2.0 Released, Anti-51% Attack, Anti-instant Mining after Hard Fork
Jan 13, 2019 - Cheetah_CpuMiner added support for CPU Mining on Mac
Jan 12, 2019 - NENG Core v1.1.2 Released to support MacOS OSX Wallet
Jan 2, 2019 - Cheetah_Cpuminer v1.1.0 is released for both Linux and Windows
Dec 31, 2018 - Technical Whitepaper is Released
Dec 28, 2018 - Cheetah_Cpuminer v1.0.0 is released for Linux
Update on Dec 14, 2018 - NENG Blockchain Stuck Issue
Nov 27, 2018 - Exclusive for PC CPU Miners - How to Steal a Block from ASIC Miners
Nov 28, 2018 - How to CPU Mine a NENG block with window/linux PC
Nov 29, 2018 - A Warning to ASIC Miners
Disclosure: Dev Team Came from ShorelineCrypto, a US based Informatics Service Business offering Fee for service for Coin Creation, Coin Exchange Listing, Blockchain Consulting, etc.
submitted by honglu69 to NewEnglandCoin [link] [comments]

7 Ways to Earn LTC/Litecoin ASAP

Earning free Litecoin works similarly to earning free Bitcoin. There are several online platforms that give users free Litecoins for performing small tasks or playing online games.
Let’s explore some of the most popular ways to get free Litecoin.

Earn free Litecoin through reputable faucets

The easiest and most popular way to earn free Litecoin is through a Litecoin faucet. A faucet is a website or an application that gives users free crypto coins for completing simple tasks. These tasks are usually easy tasks like completing some captchas, viewing adverts, or playing simple games.
After completing the microtasks, the faucet will reward you with a small amount of Litecoin (Lithoshi). Litoshi is the smallest unit of Litecoin and 1 Lithoshi is equivalent to 0.000000001 Litecoin.
There are various Litecoin faucets out there, many of them being scam faucets. Before you choose a faucet platform, make sure it’s legit. Here, we will highlight a few of the most popular and reputable ones.
It is safe to mention that you should only register on faucets that integrate micro-wallets like Coinpot. Micro-wallets allow you to collect and combine faucet payments easily.

Litecoin Faucet

Just like the previously mentioned faucet, Litecoin Faucet also allows users to earn free Litecoin by solving captchas. You can earn as much as 2,500,000 Litoshis every hour with no daily limitation on the platform.
The unique feature of Litecoin Faucet is that there is no withdrawal limit. Therefore, you can withdraw any amount of Litecoin.
Faucets are sure ways of earning free Litecoin, but you have to be very careful not to fall victim to scams. Before registering on any faucet, look out for the following:
Online reviews to know if it is legit or scam.
Coinpot or Faucethub micro — wallet integration for easy withdrawal.
Deposit before withdrawal feature — This is a typical feature of scam faucets. Faucets are supposed to be free ways to earn Litecoin without any down payment.
Earnings per hour — earnings from faucets are usually small. If a faucet promises an incredible amount of Litecoin, it is probably a scam or total waste of time.
Litecoins earnings from faucets are usually really small. If your earning expectations are high, this might not be the best option for you. There are more lucrative and legit ways to earn free Litecoin. Read on to learn about the other ways to get free Litecoin.

Litecoin cloud mining

Litecoin mining is one of the oldest ways to get free Litecoin. In recent times, earning profits from Litecoin mining can be a major hassle simply because of the cost of setting up the mining device, the cost of electricity, and many other factors.
With the introduction of cloud mining, you can earn free Litecoin without the headaches involved in setting up mining kits. You can find lots of free Litecoin cloud mining contracts online.
All you need to do is download the software on your device to start earning. These software work by using your device’s memory to generate the Litecoin. Which means the more powerful your device, the more free Litecoin you can earn.
However, some of these free Litecoin software contains malicious scripts that can compromise your security by stealing your data. You should only download mining software with great online reviews.
Back when LTC started, it was possible to mine with a standard computer’s CPU or GPU. Unfortunately, as coins grow in both age and popularity, it becomes harder and harder to mine with low-cost equipment. The days of easy mining are over, but that doesn’t mean you still can’t profit from LTC mining.
There are three ways to begin your LTC mining adventure:
Solo mining
Part of a mining pool
Cloud mining

Litecoin lending

Litecoin lending is one of the most lucrative ways to obtain free Litecoin. You can make money by purchasing some Litecoin and lending others on lending platforms.
Lending platforms like allow you to make as much as 10.5% ROI by lending your LTC. It means if you lend 100 LTC, you earn free 10.5 LTC within a year without doing anything.
By lending your Litecoin, you are making your money work for you. All you need is a trusted and secure lending platform to start earning free Litecoin with this method.

Wager your Litecoin

Another way to get free Litecoin is by wagering your Litecoin. Gambling is not the best way to earn free Litecoin because 70% of gamblers tend to lose more than what they earn.
No doubt that some people have actually managed to become rich through gambling, this, however, is very rare. So if you are a big risk-taker or you really love gambling, Litecoin gambling is one way to earn free Litecoin.
Crypto gambling websites like,, and allow you to wager your Litecoin on various casino games. Crypto gambling is probably the riskiest way to earn free Litecoin, and it is not for the faint-hearted.

Invest In Litecoin​

If you’re looking to invest in Litecoin, it’s important to remember that Litecoin is a currency. This means it doesn’t act like a stock or bond. Instead of buying shares of Litecoin, you are swapping your currency for Litecoin currency.
For example, 1 LTC is equal to about $47 USD today. The goal is for the value of Litecoin to rise, in which case, you could exchange your Litecoins back to dollars (from someone willing to do the exchange).​

Referral Links for Crypto Exchanges

This one is good for those out there with friends that are also crypto savvy. Various exchanges offer affiliate programs where you get paid out for inviting your friends and colleagues onto their platform.
Exchanges like Coinbase offer a one time payment when a new person joins their platform while others like Cryptmixer, for example, gives its members an impressive 50% of the revenue from the new clients they bring in. You can also use their exchange to swap the Bitcoin you receive to Litecoin, making it a great way to earn LTC.
submitted by MonishaNuij to MonMonCrypto [link] [comments]

Want to scrap RMT? Reduce cheating and hatcheting? Dissolve the meta? Open your mind and let's talk.

Disclaimer #2: I wrote this early yesterday morning and since then, the podcast happened and FIR Flea Market was announced. I have redacted some sections as a response.
Disclaimer: I know this is a long read and contains many sensitive subjects such as Secure Containers, the Flea Market, and Soft Skills, but it is simply a compiled list of ideas and in no way am I demanding for ultimate order in my favor or holding anybody else's ideas in contempt. I understand that my ideals may drastically differ from others. I only wrote this because of my passion for this game and my desire to see it succeed in the scope of what the devs outlined it to be, or at least how we interpret it: a hardcore looter shooter. I implore you guys to offer your own suggestions, ideas, and pick apart mine. This thread should only serve as the foundation for a greater Tarkov.
First, let's establish some terms to better differentiate between the two types of cheaters. There are consumer cheaters who use programs to gain an advantage over other players simply for the satisfaction of winning. Then, there are commercial cheaters, who are using these same programs but in order to generate an income in real life.
Commercial cheating will always be prolific in any video game that offers players transferable goods, and for as long as there is real money profit to be made, the benefits will continue to outweigh the risks. Any security expert can tell you that no lock is unpickable, no chain is unbreakable, and no password is unsolvable, but that doesn't mean we should all keep our doors unlocked, bikes unchained, and our passwords as "1234". And while a chain might not prevent your expensive road bike from getting stolen, having a chain, a disk lock, lojack, and the front wheel taken with you will certainly deter the grand majority of otherwise would-be thieves, who will of course, make an attempt on the less-protected bike adjacent to yours instead.
Battleye is a good start, the equivalent of a quality bike chain if you will, but of course--enough to stop most consumer cheaters, though not enough to stop most commercial cheaters. So let's ask ourselves: Where should intervention be focused on the most? We could target the cheat providers, but they'll keep writing more cheats. A game of cat and mouse. We could target the (commercial) cheaters, but they'll just buy more accounts and more cheats with the money they made cheating. Cat and mouse. Who else, then, if not the problem? They aren't the problem. Your every-day player. He is the problem. Small businesses are closing for good because the risk of COVID-19 is preventing customers from supporting their establishment. Let's increase the risk for the RMT customer to get the product that they paid for.
How? Make secure containers "read-only". Anything in your container can be "used" i.e. meds, keys, loose rounds for magazine packing, but nothing can be taken out or put in. It will then act as a non-transferable stash that can safeguard your valuables. No more accidentally dropping your S I C C case full of keys and then getting killed. However.. want to drop a keycard, case of bitcoins, or other valuables to a friend or a customer? It has to start and end the raid outside of either persons' secure container. This puts tradeable goods at risk for both the buyer and seller for the entirety of the raid, and not just at the extract when the transaction is made.
This simultaneously makes PVP more rewarding. Now, when you murder that pistoling who risked nearly nothing and put an annoying crack in your shiny, expensive face shield, you'll be able to take the graphics card or LEDX off of his body to remind him that his chances at those items would have been greater had he risked some gear of his own. More gear taken into raids is more gear taken out of the economy. Combined with the current weight system, this is a necessary and intuitive money sink.
On the topic of money sinks, let's consider changing how insurance works. Rather than insure items, we could insure ourself. Pay Prapor or Therapist a reasonable, fixed fee in advance to recover any goods left on our body (only what was taken IN to the raid. I was exploring the idea of having the game take a snapshot of your corpse's entire inventory upon the conclusion of the raid and sending it in the mail, but it would be too easy to abuse for RMT purposes. The seller could give the customer a backpack full of bitcoins and kill him in a bush for example). Because the body is insured and not each individual item, things such as ammo and meds could be returned without the bloat of having an insurance status on each individual bullet in a magazine, the primary reason I believe ammo to not be insurable currently. The fee could scale with the "safety" of the map. For example, Prapor's boys would probably feel less comfortable scouring Reserve for your dead body than a place like Factory, and thus the fee for body recovery on Reserve could be upwards of 100K and unless you were completely stripped, you would still probably make money back on unlooted ammo/meds alone. Factory on the other hand, because of how small the map is and therefore easy to find dead PMCs, the fee could be a reasonable 10K.
This does two things:
First, it stops insurance fraud. Dumping your gear (to ditch a thermal or wear someone else's kit, guaranteeing you get yours back) or your dead buddy's gear into a bush is unimmersive and bad for the economy. The current insurance system unreasonably rewards squad play for the wrong reasons, effectively removing the penalty for death if at least 1 competent person in the group survives (I personally frequent 3-5 man squads and it just feels unfair how much gear I get back when I die).
Second, it sets up a new dynamic in place of insurance fraud. Now, if you want your buddy to get his stuff back, you have to defend his body or extract with his gear. This rewards scavs for properly scavenging, looking for the fruitful casualties of groups that made it out. This is good for the economy, as the punishment for death almost always will result in a transfer of wealth to those who work for it and not a retention of wealth for non-solos.
Next up, the Flea Market.
It has been expressed many times by streamers that the Flea Market has ruined the game and should be removed but on the other hand, there were people complaining that level 15 was too high of a level to access the Flea Market and it has since become available earlier. I believe that the Flea Market is the core reason this game experiences the stagnant meta that it does. Global stock and personal limits from traders mean nothing when you can just visit the Flea Market and stockpile VALs and SR3Ms to run EVERY raid. Of course I am nobody to try and force anybody to play a certain way or use a certain loadout, but I do believe that the game would be more exciting if rare loadouts were actually rare. One solution is to make the Flea Market "find in raid" only. Not only would this be another nail in the RMT coffin (it would prevent customers from selling transacted barter items for exorbitant prices), but it would mark the first true player-driven economy by removing flipped goods from traders.
Traders could offer a (per-person, not global) tailored, but random assortment of goods each restock that you can piece together a kit from rather than a static array of goods unlocked by loyalty level. The (loyalty) level of the player would determine the frequency and strength of their goods. At Prapor LL4 for example, you may see VALs pop up more often, but once you buy them, that's all, and you have to wait until next restock and he might not even have any by then either. You might see a VAL available at lower loyalties as well, but even less frequently. Traders could then scale their prices dynamically to global demand (not the old, abusable system. This one would change the price incrementally based on purchase frequency. Global purchase frequency rising on a specific item? Global price on that item raises accordingly). This is good for the economy and, combined with making the Flea Market "find in raid" only, I believe it to be a solution to stagnant meta. How cool was it when you were new and killed that guy who had an SV-98 that you had to examine because you hadn't seen it until now? You'd get that feeling more often this way. Lastly, if the "find in raid" status is spoofable by cheaters, add a server-side check for the status.
Now on to weapon attachments.
Because of how unusable most stock rifles feel, there is a huge appeal for sticking as many appendages as possible to rifles to achieve that sweet <70, or god forbid, <40 recoil. Many of the attachments in the game go untouched because they don't offer even close to the arbitrary stat benefits of those in the meta. It is such a shame, as one of Tarkov's greatest strengths is the weapon modding system. I believe a step in the right direction would be to improve base weapon stats around the board (excluding weapons with fewer attachments such as the DVL) and and then nerf and bring each attachment more in line with each other, especially some of the outliers. Compare the RK-2 to the VPG for example. As such though, if an unmodded weapon vs a modded weapon wasn't night and day, it would promote significantly more weapon and attachment diversity. Of course some people are still going to min-max no matter how insignificant the benefits are. I would just like to be able to use a shortened SA-58 and be remotely competitive with a BMD'd 21" CASV SA-58. Or be able to C-clamp a Zhukov AK-102 without a foregrip and not lose to an equal-skill player 3/5 times who has the same gun, but with an RK-2.
Soft skill requirements for tasks and upgrades should be removed. They incline people to figure out ways of abusing the system and given people a reason to endorse it in order to progress through the task lines and upgrade their hideout. Soft skills should only be a passive reward for playing the game, not something people feel obligated to abuse. Additionally, PMCs should start at a higher level of soft skills, say... 10, to reflect the training and experience they received during employment. It doesn't make sense that untrained scavs have the same physical and mental capabilities as professional soldiers.
Certain skills as well can benefit greatly from a rework. Let's look at the following:

The elite perk is incredibly overpowered, but only because of how extreme it is. It could be changed so that each level of Strength increments a small % of the current elite perk, such as 0.5% per level, and then an additional 5% or so for elite, so at level 51, only 70% of the weight from worn gear would be counted. Run speed and Jump height could be reduced, and the leveling speed increased.
On the topic of gear weight, now that the weight system has been introduced and we get slower the heavier we get, could flat movement speed penalties from armor be removed? 6B43 already weighs 20KG. Why does it also slow for an additional 42%? Nobody uses heavy armor anymore because the extra protection is not worth the forfeiture of loot AND lowered base movement speed AND lowered sensitivity/ergonomics. Sensitivity inconsistency is another issue and most consider it a cardinal sin in FPS games.

Recoil Control
Heavily reduce the benefits. -0.3% recoil per level totaling -15% at level 50. As well, -0.4% recoil on the first shot per mouse click. The elite perk could be an additional 5% reduction on the first shot per mouse click. This would be a nice buff to semi-autos and make them more competitive against the current laser beam meta guns.

The elite perk, again, is overpowered. Perhaps starting at Search level 0, we should be able to search two items at the same time, but at 40% speed each if searching two items at once. If only one item is searched at a time, speed would remain at 100%. With each level, search speed for double search increases by 1% and single search by 2% and the elite perk adds an additional 10%, bringing double search speed up to 100% at level 51 without the black and white difference between levels 50 and 51.

TL;DR: No TL;DR because I know some people will draw wild conclusions before fully understanding the content of the post.
submitted by 1199_Panigale_S to EscapefromTarkov [link] [comments]

Searching for the Unicorn Cryptocurrency

Searching for the Unicorn Cryptocurrency
For someone first starting out as a cryptocurrency investor, finding a trustworthy manual for screening a cryptocurrency’s merits is nonexistent as we are still in the early, Wild West days of the cryptocurrency market. One would need to become deeply familiar with the inner workings of blockchain to be able to perform the bare minimum due diligence.
One might believe, over time, that finding the perfect cryptocurrency may be nothing short of futile. If a cryptocurrency purports infinite scalability, then it is probably either lightweight with limited features or it is highly centralized among a limited number of nodes that perform consensus services especially Proof of Stake or Delegated Proof of Stake. Similarly, a cryptocurrency that purports comprehensive privacy may have technical obstacles to overcome if it aims to expand its applications such as in smart contracts. The bottom line is that it is extremely difficult for a cryptocurrency to have all important features jam-packed into itself.
The cryptocurrency space is stuck in the era of the “dial-up internet” in a manner of speaking. Currently blockchain can’t scale – not without certain tradeoffs – and it hasn’t fully resolved certain intractable issues such as user-unfriendly long addresses and how the blockchain size is forever increasing to name two.
In other words, we haven’t found the ultimate cryptocurrency. That is, we haven’t found the mystical unicorn cryptocurrency that ushers the era of decentralization while eschewing all the limitations of traditional blockchain systems.
“But wait – what about Ethereum once it implements sharding?”
“Wouldn’t IOTA be able to scale infinitely with smart contracts through its Qubic offering?”
“Isn’t Dash capable of having privacy, smart contracts, and instantaneous transactions?”
Those thoughts and comments may come from cryptocurrency investors who have done their research. It is natural for the informed investors to invest in projects that are believed to bring cutting edge technological transformation to blockchain. Sooner or later, the sinking realization will hit that any variation of the current blockchain technology will always likely have certain limitations.
Let us pretend that there indeed exists a unicorn cryptocurrency somewhere that may or may not be here yet. What would it look like, exactly? Let us set the 5 criteria of the unicorn cryptocurrency:
Unicorn Criteria
(1) Perfectly solves the blockchain trilemma:
o Infinite scalability
o Full security
o Full decentralization
(2) Zero or minimal transaction fee
(3) Full privacy
(4) Full smart contract capabilities
(5) Fair distribution and fair governance
For each of the above 5 criteria, there would not be any middle ground. For example, a cryptocurrency with just an in-protocol mixer would not be considered as having full privacy. As another example, an Initial Coin Offering (ICO) may possibly violate criterion (5) since with an ICO the distribution and governance are often heavily favored towards an oligarchy – this in turn would defy the spirit of decentralization that Bitcoin was found on.
There is no cryptocurrency currently that fits the above profile of the unicorn cryptocurrency. Let us examine an arbitrary list of highly hyped cryptocurrencies that meet the above list at least partially. The following list is by no means comprehensive but may be a sufficient sampling of various blockchain implementations:
Bitcoin (BTC)
Bitcoin is the very first and the best known cryptocurrency that started it all. While Bitcoin is generally considered extremely secure, it suffers from mining centralization to a degree. Bitcoin is not anonymous, lacks smart contracts, and most worrisomely, can only do about 7 transactions per seconds (TPS). Bitcoin is not the unicorn notwithstanding all the Bitcoin maximalists.
Ethereum (ETH)
Ethereum is widely considered the gold standard of smart contracts aside from its scalability problem. Sharding as part of Casper’s release is generally considered to be the solution to Ethereum’s scalability problem.
The goal of sharding is to split up validating responsibilities among various groups or shards. Ethereum’s sharding comes down to duplicating the existing blockchain architecture and sharing a token. This does not solve the core issue and simply kicks the can further down the road. After all, full nodes still need to exist one way or another.
Ethereum’s blockchain size problem is also an issue as will be explained more later in this article.
As a result, Ethereum is not the unicorn due to its incomplete approach to scalability and, to a degree, security.
Dash’s masternodes are widely considered to be centralized due to their high funding requirements, and there are accounts of a pre-mine in the beginning. Dash is not the unicorn due to its questionable decentralization.
Nano boasts rightfully for its instant, free transactions. But it lacks smart contracts and privacy, and it may be exposed to well orchestrated DDOS attacks. Therefore, it goes without saying that Nano is not the unicorn.
While EOS claims to execute millions of transactions per seconds, a quick glance reveals centralized parameters with 21 nodes and a questionable governance system. Therefore, EOS fails to achieve the unicorn status.
Monero (XMR)
One of the best known and respected privacy coins, Monero lacks smart contracts and may fall short of infinite scalability due to CryptoNote’s design. The unicorn rank is out of Monero’s reach.
IOTA’s scalability is based on the number of transactions the network processes, and so its supposedly infinite scalability would fluctuate and is subject to the whims of the underlying transactions. While IOTA’s scalability approach is innovative and may work in the long term, it should be reminded that the unicorn cryptocurrency has no middle ground. The unicorn cryptocurrency would be expected to scale infinitely on a consistent basis from the beginning.
In addition, IOTA’s Masked Authenticated Messaging (MAM) feature does not bring privacy to the masses in a highly convenient manner. Consequently, the unicorn is not found with IOTA.

PascalCoin as a Candidate for the Unicorn Cryptocurrency
Please allow me to present a candidate for the cryptocurrency unicorn: PascalCoin.
According to the website, PascalCoin claims the following:
“PascalCoin is an instant, zero-fee, infinitely scalable, and decentralized cryptocurrency with advanced privacy and smart contract capabilities. Enabled by the SafeBox technology to become the world’s first blockchain independent of historical operations, PascalCoin possesses unlimited potential.”
The above summary is a mouthful to be sure, but let’s take a deep dive on how PascalCoin innovates with the SafeBox and more. Before we do this, I encourage you to first become acquainted with PascalCoin by watching the following video introduction:
The rest of this section will be split into 10 parts in order to illustrate most of the notable features of PascalCoin. Naturally, let’s start off with the SafeBox.
Part #1: The SafeBox
Unlike traditional UTXO-based cryptocurrencies in which the blockchain records the specifics of each transaction (address, sender address, amount of funds transferred, etc.), the blockchain in PascalCoin is only used to mutate the SafeBox. The SafeBox is a separate but equivalent cryptographic data structure that snapshots account balances. PascalCoin’s blockchain is comparable to a machine that feeds the most important data – namely, the state of an account – into the SafeBox. Any node can still independently compute and verify the cumulative Proof-of-Work required to construct the SafeBox.
The PascalCoin whitepaper elegantly highlights the unique historical independence that the SafeBox possesses:
“While there are approaches that cryptocurrencies could use such as pruning, warp-sync, "finality checkpoints", UTXO-snapshotting, etc, there is a fundamental difference with PascalCoin. Their new nodes can only prove they are on most-work-chain using the infinite history whereas in PascalCoin, new nodes can prove they are on the most-work chain without the infinite history.”
Some cryptocurrency old-timers might instinctively balk at the idea of full nodes eschewing the entire history for security, but such a reaction would showcase a lack of understanding on what the SafeBox really does.
A concrete example would go a long way to best illustrate what the SafeBox does. Let’s say I input the following operations in my calculator:
5 * 5 – 10 / 2 + 5
It does not take a genius to calculate the answer, 25. Now, the expression “5 \ 5 – 10 / 2 + 5”* would be forever imbued on a traditional blockchain’s history. But the SafeBox begs to differ. It says that the expression “5 \ 5 – 10 / 2 + 5”* should instead be simply “25” so as preserve simplicity, time, and space. In other words, the SafeBox simply preserves the account balance.
But some might still be unsatisfied and claim that if one cannot trace the series of operations (transactions) that lead to the final number (balance) of 25, the blockchain is inherently insecure.
Here are four important security aspects of the SafeBox that some people fail to realize:
(1) SafeBox Follows the Longest Chain of Proof-of-Work
The SafeBox mutates itself per 100 blocks. Each new SafeBox mutation must reference both to the previous SafeBox mutation and the preceding 100 blocks in order to be valid, and the resultant hash of the new mutated SafeBox must then be referenced by each of the new subsequent blocks, and the process repeats itself forever.
The fact that each new SafeBox mutation must reference to the previous SafeBox mutation is comparable to relying on the entire history. This is because the previous SafeBox mutation encapsulates the result of cumulative entire history except for the 100 blocks which is why each new SafeBox mutation requires both the previous SafeBox mutation and the preceding 100 blocks.
So in a sense, there is a single interconnected chain of inflows and outflows, supported by Byzantine Proof-of-Work consensus, instead of the entire history of transactions.
More concretely, the SafeBox follows the path of the longest chain of Proof-of-Work simply by design, and is thus cryptographically equivalent to the entire history even without tracing specific operations in the past. If the chain is rolled back with a 51% attack, only the attacker’s own account(s) in the SafeBox can be manipulated as is explained in the next part.
(2) A 51% Attack on PascalCoin Functions the Same as Others
A 51% attack on PascalCoin would work in a similar way as with other Proof-of-Work cryptocurrencies. An attacker cannot modify a transaction in the past without affecting the current SafeBox hash which is accepted by all honest nodes.
Someone might claim that if you roll back all the current blocks plus the 100 blocks prior to the SafeBox’s mutation, one could create a forged SafeBox with different balances for all accounts. This would be incorrect as one would be able to manipulate only his or her own account(s) in the SafeBox with a 51% attack – just as is the case with other UTXO cryptocurrencies. The SafeBox stores the balances of all accounts which are in turn irreversibly linked only to their respective owners’ private keys.
(3) One Could Preserve the Entire History of the PascalCoin Blockchain
No blockchain data in PascalCoin is ever deleted even in the presence of the SafeBox. Since the SafeBox is cryptographically equivalent to a full node with the entire history as explained above, PascalCoin full nodes are not expected to contain infinite history. But for whatever reason(s) one may have, one could still keep all the PascalCoin blockchain history as well along with the SafeBox as an option even though it would be redundant.
Without storing the entire history of the PascalCoin blockchain, you can still trace the specific operations of the 100 blocks prior to when the SafeBox absorbs and reflects the net result (a single balance for each account) from those 100 blocks. But if you’re interested in tracing operations over a longer period in the past – as redundant as that may be – you’d have the option to do so by storing the entire history of the PascalCoin blockchain.
(4) The SafeBox is Equivalent to the Entire Blockchain History
Some skeptics may ask this question: “What if the SafeBox is forever lost? How would you be able to verify your accounts?” Asking this question is tantamount to asking to what would happen to Bitcoin if all of its entire history was erased. The result would be chaos, of course, but the SafeBox is still in line with the general security model of a traditional blockchain with respect to black swans.
Now that we know the security of the SafeBox is not compromised, what are the implications of this new blockchain paradigm? A colorful illustration as follows still wouldn’t do justice to the subtle revolution that the SafeBox ushers. The automobiles we see on the street are the cookie-and-butter representation of traditional blockchain systems. The SafeBox, on the other hand, supercharges those traditional cars to become the Transformers from Michael Bay’s films.
The SafeBox is an entirely different blockchain architecture that is impressive in its simplicity and ingenuity. The SafeBox’s design is only the opening act for PascalCoin’s vast nuclear arsenal. If the above was all that PascalCoin offers, it still wouldn’t come close to achieving the unicorn status but luckily, we have just scratched the surface. Please keep on reading on if you want to learn how PascalCoin is going to shatter the cryptocurrency industry into pieces. Buckle down as this is going to be a long read as we explore further about the SafeBox’s implications.
Part #2: 0-Confirmation Transactions
To begin, 0-confirmation transactions are secure in PascalCoin thanks to the SafeBox.
The following paraphrases an explanation of PascalCoin’s 0-confirmations from the whitepaper:
“Since PascalCoin is not a UTXO-based currency but rather a State-based currency thanks to the SafeBox, the security guarantee of 0-confirmation transactions are much stronger than in UTXO-based currencies. For example, in Bitcoin if a merchant accepts a 0-confirmation transaction for a coffee, the buyer can simply roll that transaction back after receiving the coffee but before the transaction is confirmed in a block. The way the buyer does this is by re-spending those UTXOs to himself in a new transaction (with a higher fee) thus invalidating them for the merchant. In PascalCoin, this is virtually impossible since the buyer's transaction to the merchant is simply a delta-operation to debit/credit a quantity from/to accounts respectively. The buyer is unable to erase or pre-empt this two-sided, debit/credit-based transaction from the network’s pending pool until it either enters a block for confirmation or is discarded with respect to both sender and receiver ends. If the buyer tries to double-spend the coffee funds after receiving the coffee but before they clear, the double-spend transaction will not propagate the network since nodes cannot propagate a double-spending transaction thanks to the debit/credit nature of the transaction. A UTXO-based transaction is initially one-sided before confirmation and therefore is more exposed to one-sided malicious schemes of double spending.”
Phew, that explanation was technical but it had to be done. In summary, PascalCoin possesses the only secure 0-confirmation transactions in the cryptocurrency industry, and it goes without saying that this means PascalCoin is extremely fast. In fact, PascalCoin is capable of 72,000 TPS even prior to any additional extensive optimizations down the road. In other words, PascalCoin is as instant as it gets and gives Nano a run for its money.
Part #3: Zero Fee
Let’s circle back to our discussion of PascalCoin’s 0-confirmation capability. Here’s a little fun magical twist to PascalCoin’s 0-confirmation magic: 0-confirmation transactions are zero-fee. As in you don’t pay a single cent in fee for each 0-confirmation! There is just a tiny downside: if you create a second transaction in a 5-minute block window then you’d need to pay a minimal fee. Imagine using Nano but with a significantly stronger anti-DDOS protection for spam! But there shouldn’t be any complaint as this fee would amount to 0.0001 Pascal or $0.00002 based on the current price of a Pascal at the time of this writing.
So, how come the fee for blazingly fast transactions is nonexistent? This is where the magic of the SafeBox arises in three ways:
(1) PascalCoin possesses the secure 0-confirmation feature as discussed above that enables this speed.
(2) There is no fee bidding competition of transaction priority typical in UTXO cryptocurrencies since, once again, PascalCoin operates on secure 0-confirmations.
(3) There is no fee incentive needed to run full nodes on behalf of the network’s security beyond the consensus rewards.
Part #4: Blockchain Size
Let’s expand more on the third point above, using Ethereum as an example. Since Ethereum’s launch in 2015, its full blockchain size is currently around 2 TB, give or take, but let’s just say its blockchain size is 100 GB for now to avoid offending the Ethereum elitists who insist there are different types of full nodes that are lighter. Whoever runs Ethereum’s full nodes would expect storage fees on top of the typical consensus fees as it takes significant resources to shoulder Ethereum’s full blockchain size and in turn secure the network. What if I told you that PascalCoin’s full blockchain size will never exceed few GBs after thousands of years? That is just what the SafeBox enables PascalCoin to do so. It is estimated that by 2072, PascalCoin’s full nodes will only be 6 GB which is low enough not to warrant any fee incentives for hosting full nodes. Remember, the SafeBox is an ultra-light cryptographic data structure that is cryptographically equivalent to a blockchain with the entire transaction history. In other words, the SafeBox is a compact spreadsheet of all account balances that functions as PascalCoin’s full node!
Not only does the SafeBox’s infinitesimal memory size helps to reduce transaction fees by phasing out any storage fees, but it also paves the way for true decentralization. It would be trivial for every PascalCoin user to opt a full node in the form of a wallet. This is extreme decentralization at its finest since the majority of users of other cryptocurrencies ditch full nodes due to their burdensome sizes. It is naïve to believe that storage costs would reduce enough to the point where hosting full nodes are trivial. Take a look at the following chart outlining the trend of storage cost.

As we can see, storage costs continue to decrease but the descent is slowing down as is the norm with technological improvements. In the meantime, blockchain sizes of other cryptocurrencies are increasing linearly or, in the case of smart contract engines like Ethereum, parabolically. Imagine a cryptocurrency smart contract engine like Ethereum garnering worldwide adoption; how do you think Ethereum’s size would look like in the far future based on the following chart?

Ethereum’s future blockchain size is not looking pretty in terms of sustainable security. Sharding is not a fix for this issue since there still needs to be full nodes but that is a different topic for another time.
It is astonishing that the cryptocurrency community as a whole has passively accepted this forever-expanding-blockchain-size problem as an inescapable fate.
PascalCoin is the only cryptocurrency that has fully escaped the death vortex of forever expanding blockchain size. Its blockchain size wouldn’t exceed 10 GB even after many hundreds of years of worldwide adoption. Ethereum’s blockchain size after hundreds of years of worldwide adoption would make fine comedy.
Part #5: Simple, Short, and Ordinal Addresses
Remember how the SafeBox works by snapshotting all account balances? As it turns out, the account address system is almost as cool as the SafeBox itself.
Imagine yourself in this situation: on a very hot and sunny day, you’re wandering down the street across from your house and ran into a lemonade stand – the old-fashioned kind without any QR code or credit card terminal. The kid across you is selling a lemonade cup for 1 Pascal with a poster outlining the payment address as 5471-55. You flip out your phone and click “Send” with 1 Pascal to the address 5471-55; viola, exactly one second later you’re drinking your lemonade without paying a cent for the transaction fee!
The last thing one wants to do is to figure out how to copy/paste to, say, the following address 1BoatSLRHtKNngkdXEeobR76b53LETtpyT on the spot wouldn’t it? Gone are the obnoxiously long addresses that plague all cryptocurrencies. The days of those unreadable addresses will be long gone – it has to be if blockchain is to innovate itself for the general public. EOS has a similar feature for readable addresses but in a very limited manner in comparison, and nicknames attached to addresses in GUIs don’t count since blockchain-wide compatibility wouldn’t hold.
Not only does PascalCoin has the neat feature of having addresses (called PASAs) that amount to up to 6 or 7 digits, but PascalCoin can also incorporate in-protocol address naming as opposed to GUI address nicknames. Suppose I want to order something from Amazon using Pascal; I simply search the word “Amazon” then the corresponding account number shows up. Pretty neat, right?
The astute reader may gather that PascalCoin’s address system makes it necessary to commoditize addresses, and he/she would be correct. Some view this as a weakness; part #10 later in this segment addresses this incorrect perception.
Part #6: Privacy
As if the above wasn’t enough, here’s another secret that PascalCoin has: it is a full-blown privacy coin. It uses two separate foundations to achieve comprehensive anonymity: in-protocol mixer for transfer amounts and zn-SNARKs for private balances. The former has been implemented and the latter is on the roadmap. Both the 0-confirmation transaction and the negligible transaction fee would make PascalCoin the most scalable privacy coin of any other cryptocurrencies pending the zk-SNARKs implementation.
Part #7: Smart Contracts
Next, PascalCoin will take smart contracts to the next level with a layer-2 overlay consensus system that pioneers sidechains and other smart contract implementations.
In formal terms, this layer-2 architecture will facilitate the transfer of data between PASAs which in turn allows clean enveloping of layer-2 protocols inside layer-1 much in the same way that HTTP lives inside TCP.
To summarize:
· The layer-2 consensus method is separate from the layer-1 Proof-of-Work. This layer-2 consensus method is independent and flexible. A sidechain – based on a single encompassing PASA – could apply Proof-of-Stake (POS), Delegated Proof-of-Stake (DPOS), or Directed Acyclic Graph (DAG) as the consensus system of its choice.
· Such a layer-2 smart contract platform can be written in any languages.
· Layer-2 sidechains will also provide very strong anonymity since funds are all pooled and keys are not used to unlock them.
· This layer-2 architecture is ingenious in which the computation is separate from layer-2 consensus, in effect removing any bottleneck.
· Horizontal scaling exists in this paradigm as there is no interdependence between smart contracts and states are not managed by slow sidechains.
· Speed and scalability are fully independent of PascalCoin.
One would be able to run the entire global financial system on PascalCoin’s infinitely scalable smart contract platform and it would still scale infinitely. In fact, this layer-2 architecture would be exponentially faster than Ethereum even after its sharding is implemented.
All this is the main focus of PascalCoin’s upcoming version 5 in 2019. A whitepaper add-on for this major upgrade will be released in early 2019.
Part #8: RandomHash Algorithm
Surely there must be some tradeoffs to PascalCoin’s impressive capabilities, you might be asking yourself. One might bring up the fact that PascalCoin’s layer-1 is based on Proof-of-Work and is thus susceptible to mining centralization. This would be a fallacy as PascalCoin has pioneered the very first true ASIC, GPU, and dual-mining resistant algorithm known as RandomHash that obliterates anything that is not CPU based and gives all the power back to solo miners.
Here is the official description of RandomHash:
“RandomHash is a high-level cryptographic hash algorithm that combines other well-known hash primitives in a highly serial manner. The distinguishing feature is that calculations for a nonce are dependent on partial calculations of other nonces, selected at random. This allows a serial hasher (CPU) to re-use these partial calculations in subsequent mining saving 50% or more of the work-load. Parallel hashers (GPU) cannot benefit from this optimization since the optimal nonce-set cannot be pre-calculated as it is determined on-the-fly. As a result, parallel hashers (GPU) are required to perform the full workload for every nonce. Also, the algorithm results in 10x memory bloat for a parallel implementation. In addition to its serial nature, it is branch-heavy and recursive making in optimal for CPU-only mining.”
One might be understandably skeptical of any Proof-of-Work algorithm that solves ASIC and GPU centralization once for all because there have been countless proposals being thrown around for various algorithms since the dawn of Bitcoin. Is RandomHash truly the ASIC & GPU killer that it claims to be?
Herman Schoenfeld, the inventor behind RandomHash, described his algorithm in the following:
“RandomHash offers endless ASIC-design breaking surface due to its use of recursion, hash algo selection, memory hardness and random number generation.
For example, changing how round hash selection is made and/or random number generator algo and/or checksum algo and/or their sequencing will totally break an ASIC design. Conceptually if you can significantly change the structure of the output assembly whilst keeping the high-level algorithm as invariant as possible, the ASIC design will necessarily require proportional restructuring. This results from the fact that ASIC designs mirror the ASM of the algorithm rather than the algorithm itself.”
Polyminer1 (pseudonym), one of the members of the PascalCoin core team who developed RHMiner (official software for mining RandomHash), claimed as follows:
“The design of RandomHash is, to my experience, a genuine innovation. I’ve been 30 years in the field. I’ve rarely been surprised by anything. RandomHash was one of my rare surprises. It’s elegant, simple, and achieves resistance in all fronts.”
PascalCoin may have been the first party to achieve the race of what could possibly be described as the “God algorithm” for Proof-of-Work cryptocurrencies. Look no further than one of Monero’s core developers since 2015, Howard Chu. In September 2018, Howard declared that he has found a solution, called RandomJS, to permanently keep ASICs off the network without repetitive algorithm changes. This solution actually closely mirrors RandomHash’s algorithm. Discussing about his algorithm, Howard asserted that “RandomJS is coming at the problem from a direction that nobody else is.”
Link to Howard Chu’s article on RandomJS:
Yet when Herman was asked about Howard’s approach, he responded:
“Yes, looks like it may work although using Javascript was a bit much. They should’ve just used an assembly subset and generated random ASM programs. In a way, RandomHash does this with its repeated use of random mem-transforms during expansion phase.”
In the end, PascalCoin may have successfully implemented the most revolutionary Proof-of-Work algorithm, one that eclipses Howard’s burgeoning vision, to date that almost nobody knows about. To learn more about RandomHash, refer to the following resources:
RandomHash whitepaper:
Technical proposal for RandomHash:
Someone might claim that PascalCoin still suffers from mining centralization after RandomHash, and this is somewhat misleading as will be explained in part #10.
Part #9: Fair Distribution and Governance
Not only does PascalCoin rest on superior technology, but it also has its roots in the correct philosophy of decentralized distribution and governance. There was no ICO or pre-mine, and the developer fund exists as a percentage of mining rewards as voted by the community. This developer fund is 100% governed by a decentralized autonomous organization – currently facilitated by the PascalCoin Foundation – that will eventually be transformed into an autonomous smart contract platform. Not only is the developer fund voted upon by the community, but PascalCoin’s development roadmap is also voted upon the community via the Protocol Improvement Proposals (PIPs).
This decentralized governance also serves an important benefit as a powerful deterrent to unseemly fork wars that befall many cryptocurrencies.
Part #10: Common Misconceptions of PascalCoin
“The branding is terrible”
PascalCoin is currently working very hard on its image and is preparing for several branding and marketing initiatives in the short term. For example, two of the core developers of the PascalCoin recently interviewed with the Fox Business Network. A YouTube replay of this interview will be heavily promoted.
Some people object to the name PascalCoin. First, it’s worth noting that PascalCoin is the name of the project while Pascal is the name of the underlying currency. Secondly, Google and YouTube received excessive criticisms back then in the beginning with their name choices. Look at where those companies are nowadays – surely a somewhat similar situation faces PascalCoin until the name’s familiarity percolates into the public.
“The wallet GUI is terrible”
As the team is run by a small yet extremely dedicated developers, multiple priorities can be challenging to juggle. The lack of funding through an ICO or a pre-mine also makes it challenging to accelerate development. The top priority of the core developers is to continue developing full-time on the groundbreaking technology that PascalCoin offers. In the meantime, an updated and user-friendly wallet GUI has been worked upon for some time and will be released in due time. Rome wasn’t built in one day.
“One would need to purchase a PASA in the first place”
This is a complicated topic since PASAs need to be commoditized by the SafeBox’s design, meaning that PASAs cannot be obtained at no charge to prevent systematic abuse. This raises two seemingly valid concerns:
· As a chicken and egg problem, how would one purchase a PASA using Pascal in the first place if one cannot obtain Pascal without a PASA?
· How would the price of PASAs stay low and affordable in the face of significant demand?
With regards to the chicken and egg problem, there are many ways – some finished and some unfinished – to obtain your first PASA as explained on the “Get Started” page on the PascalCoin website:
More importantly, however, is the fact that there are few methods that can get your first PASA for free. The team will also release another method soon in which you could obtain your first PASA for free via a single SMS message. This would probably become by far the simplest and the easiest way to obtain your first PASA for free. There will be more new ways to easily obtain your first PASA for free down the road.
What about ensuring the PASA market at large remains inexpensive and affordable following your first (and probably free) PASA acquisition? This would be achieved in two ways:
· Decentralized governance of the PASA economics per the explanation in the FAQ section on the bottom of the PascalCoin website (
· Unlimited and free pseudo-PASAs based on layer-2 in the next version release.
“PascalCoin is still centralized after the release of RandomHash”
Did the implementation of RandomHash from version 4 live up to its promise?
The official goals of RandomHash were as follow:
(1) Implement a GPU & ASIC resistant hash algorithm
(2) Eliminate dual mining
The two goals above were achieved by every possible measure.
Yet a mining pool, Nanopool, was able to regain its hash majority after a significant but a temporary dip.
The official conclusion is that, from a probabilistic viewpoint, solo miners are more profitable than pool miners. However, pool mining is enticing for solo miners who 1) have limited hardware as it ensures a steady income instead of highly profitable but probabilistic income via solo mining, and 2) who prefer convenient software and/or GUI.
What is the next step, then? While the barrier of entry for solo miners has successfully been put down, additional work needs to be done. The PascalCoin team and the community are earnestly investigating additional steps to improve mining decentralization with respect to pool mining specifically to add on top of RandomHash’s successful elimination of GPU, ASIC, and dual-mining dominance.
It is likely that the PascalCoin community will promote the following two initiatives in the near future:
(1) Establish a community-driven, nonprofit mining pool with attractive incentives.
(2) Optimize RHMiner, PascalCoin’s official solo mining software, for performance upgrades.
A single pool dominance is likely short lived once more options emerge for individual CPU miners who want to avoid solo mining for whatever reason(s).
Let us use Bitcoin as an example. Bitcoin mining is dominated by ASICs and mining pools but no single pool is – at the time of this writing – even close on obtaining the hash majority. With CPU solo mining being a feasible option in conjunction with ASIC and GPU mining eradication with RandomHash, the future hash rate distribution of PascalCoin would be far more promising than Bitcoin’s hash rate distribution.
PascalCoin is the Unicorn Cryptocurrency
If you’ve read this far, let’s cut straight to the point: PascalCoin IS the unicorn cryptocurrency.
It is worth noting that PascalCoin is still a young cryptocurrency as it was launched at the end of 2016. This means that many features are still work in progress such as zn-SNARKs, smart contracts, and pool decentralization to name few. However, it appears that all of the unicorn criteria are within PascalCoin’s reach once PascalCoin’s technical roadmap is mostly completed.
Based on this expository on PascalCoin’s technology, there is every reason to believe that PascalCoin is the unicorn cryptocurrency. PascalCoin also solves two fundamental blockchain problems beyond the unicorn criteria that were previously considered unsolvable: blockchain size and simple address system. The SafeBox pushes PascalCoin to the forefront of cryptocurrency zeitgeist since it is a superior solution compared to UTXO, Directed Acyclic Graph (DAG), Block Lattice, Tangle, and any other blockchain innovations.


Author: Tyler Swob
submitted by Kosass to CryptoCurrency [link] [comments]

Bitcoin Mining Profitability: How Long Does it Take to Mine One Bitcoin in 2019?

When it comes to Bitcoin (BTC) mining, the major questions on people’s minds are “how profitable is Bitcoin mining” and “how long would it take to mine one Bitcoin?” To answer these questions, we need to take an in-depth look at the current state of the Bitcoin mining industry — and how it has changed — over the last several years.
Bitcoin mining is, essentially, the process of participating in Bitcoin’s underlying security mechanism — known as proof-of-work — to help secure the Bitcoin blockchain. In return, participants receive compensation in bitcoins (BTC).
When you participate in Bitcoin mining, you are essentially searching for blocks by crunching complex cryptographic challenges using your mining hardware. Once a block is discovered, new transactions are recorded and verified within the block and the block discoverer receives the block rewards — currently set at 12.5 BTC — as well as the transactions fees for the transactions included within the block.
Once the maximum supply of 21 million Bitcoins has been mined, no further Bitcoins will ever come into existence. This property makes Bitcoin deflationary, something which many argue will inevitably increase the value of each Bitcoin unit as it becomes more scarce due to increased global adoption.
The limited supply of Bitcoin is also one of the reasons why Bitcoin mining has become so popular. In previous years, Bitcoin mining proved to be a lucrative investment option — netting miners with several fold returns on their investment with relatively little effort.
bitcoin mining hardware
Mining Hardware
The mining hardware you choose will mostly depend on your circumstances — in terms of budget, location and electricity costs. Since the amount of hashing power you can dedicate to the mining process is directly correlated with how much Bitcoin you will mine per day, it is wise to ensure your hardware is still competitive in 2019.
Bitcoin uses SHA256 as its mining algorithm. Because of this, only hardware compatible with this algorithm can be used to mine Bitcoin. Although it is technically possible to mine Bitcoin on your current computer hardware — using your CPU or GPU — this will almost certainly not generate a positive return on your investment and you may end up damaging your device.
The most cost-effective way to mine Bitcoin in 2019 is using application-specific integrated circuit (ASIC) mining hardware. These are specially-designed machines that offer much higher performance per watt than typical computers and have been an absolutely essential purchase for anybody looking to get into Bitcoin mining since the first Avalon ASICs were shipped in 2013.
When it comes to selecting Bitcoin mining hardware, there are several main parameters to consider — though the importance of each of these may vary based on personal circumstances and budget.
Performance per Watt
When it comes to Bitcoin mining, performance per watt is a measure of how many gigahashes per watt a machine is capable of and is, hence, a simple measure of its efficiency. Since electricity costs are likely to be one of the largest expenses when mining Bitcoin, it is usually a good idea to ensure that you are getting good performance per watt out of your hardware.
Ideally, your mining hardware would be highly efficient, allowing it to mine Bitcoin with lower energy requirements — though this will need to be balanced with acquisition costs, as often the most efficient hardware is also the most expensive. This means it may take longer to see a return on investment.
In countries with cheap electricity, performance per watt is often less of a concern than acquisition costs and price-performance ratio. In most countries, operating outdated mining hardware is typically cost prohibitive, as energy costs outweigh the income generated by the mining equipment.
However, this may not be the case for those operating in countries with extremely cheap electricity — such as Kuwait and Venezuela — as even older equipment can still be profitable. Similarly, miners with a free energy surplus, such as from wind or solar electric generators, can benefit from the minimal gains offered by still running outdated hardware.
The lifetime of mining hardware also plays a critical role in determining how profitable your mining venture will be. It’s always a good idea to do whatever possible to ensure it runs as smoothly as possible.
Since mining equipment tends to run at a full (or almost full) load for extended periods, they also tend to break down and fail more frequently than most electronics — which can seriously damage your profitability. Equipment failure is even more common when purchasing second-hand equipment. Since warranty claims are often challenging, it can often take a long time to receive a warranty replacement.
Price-Performance Ratio
In many cases, one of the major criteria used to select mining hardware is the price-performance ratio — a measure of how much performance a machine outputs per unit price. In the case of cryptocurrency mining hardware, this is commonly expressed as gigahashes per dollar or GH/$.
Under ideal circumstances, the mining hardware would have a high price-performance ratio, ensuring you get a lot of bang for your buck. However, this must also be considered in combination with the acquisition costs and the expected lifetime of the machine — since the absolute most powerful machines are not always the cheapest or the most energy efficient.
Acquisition Costs
Acquisition costs are almost always the biggest barrier to entry for most Bitcoin miners since most top-end mining hardware costs several thousand dollars. This problem is further compounded by the fact that many hardware manufacturers offer discounts for bulk purchases, allowing those with deeper pockets to achieve a better price-performance ratio.
Acquisition costs include all the costs involved in purchasing any mining equipment, including hardware costs, shipping costs, import duties, and any further costs. For example, many ASIC miners do not include a power supply — which can be another considerable expense, since the 1,000W+ power supplies usually required tend to cost several hundred dollars alone.
Ensuring your equipment runs smoothly can also add in additional costs, such as cooling and maintenance expenses. In addition, some miners may want to invest in uninterruptible power supplies to ensure their hardware keeps running — even if the power fails temporarily.
asic mining
Current Generation Hardware
One of the most recent additions to the Bitcoin mining hardware market is the Ebang Ebit E11++, which was released in October 2018. Using a 10nm fabrication process for its processors, the Ebit E11++ is able to achieve one of the highest hash rates on the market at 44TH/s.
In terms of efficiency, the Ebang Ebit E11++ is arguably the best on the market, offering 44TH/s of hash rate while drawing just 1,980W of power, offering 22.2GH/W performance. However, as of writing, the Ebang Ebit E11++ is out of stock until March 31, 2019 — while its price of $2,024 (excluding shipping) may make it prohibitively expensive for those first getting involved with Bitcoin mining.
Another popular choice is the ASICminer 8 Nano, a machine released in October 2018 that offers 44TH/s for $3,900 excluding shipping. The ASICminer 8 Nano draws 2,100W of power, giving it an efficiency of almost 21GH/W — slightly lower than the Ebit E11++ while costing almost double the price. However, unlike the E11++, the 8 Nano is actually in stock and available to purchase.
ASICminer also offers the 8 Nano Pro, a machine launched in mid-2018 that offers 80 TH/s of hash rate for $9,500 (excluding shipping). However, unlike the Ebit E11++ and 8 Nano, the minimum order quantity for the 8 Nano Pro is curiously set at five, meaning you will need to lay out a minimum of $47,500 in order to actually get your hands on one (or five).
While the 8 Nano Pro doesn’t offer the same performance per watt as the Ebit E11+ or AICMiner 8 Nano, it is one of the quieter miners on this list, making it more suitable for a home or office environment. That being said, the ASICminer 8 Nano Pro is easily the most expensive miner per TH on this list — costing a whopping $118.75/TH, compared to the $46/TH offered by the E11++ and $88.64 offered by the 8 Nano.
The latest hardware on this list is the Innosilicon T3 43T, which is currently available for pre-order at $2,279, and estimated to ship in March 2019. Offering 43TH/s of performance at 2,100W, the T3 43T comes in at an efficiency of 20.4GH/W, which is around 10 percent less energy efficient than the Ebit E11++.
The T3 43T also has a minimum order quantity of three units, making the minimum acquisition cost $6837 + shipping for preorders. All in all, the T3 43T is more costly and less efficient than the E11++ but may arrive slightly earlier since Ebang will not ship the E11++ units until at least end March 29, 2019.
Finally, this list would not be complete without including Bitmain’s latest offering, the Antminer S15-28TH/s, which — as its name suggests — offers 28TH/s of hash power while drawing just under 1600W at the wall. The Antminer S15 is one of the only SHA256 miners to use 7nm processors, making it somewhat smaller than some of the other devices on this list.
Like most pieces of top-end Bitcoin mining hardware, the Antminer S15 27TH/s model is currently sold out, with current orders not shipping until mid-February 2019. However, the S15 is offered at a significantly lower price than many of its competitors at just $1020 (excluding shipping), with no minimum quantity restriction. At these rates, the Antminer comes in at just $37.78/TH — though its energy efficiency is a much less impressive 17.5GH/W.
Mining Hardware Mining Hardware Comparison
Performance (GH/W) Price Performance Ratio ($/TH)
Ebang Ebit E11++ 22.2GH/W $46/TH
ASICminer 8 Nano 21GH/W $88.64/TH
ASICminer 8 Nano Pro 19GH/W $118.75/TH
Innosilicon T3 43T 20.4GH/W $53/TH
Antminer S15-28TH/s 17.5GH/W $37.78/TH
How To Select a Good Mining Pool
Mining pools are platforms that allow miners to pool their resources together to achieve a higher collective hash rate — which, in turn, allows the collective to mine more blocks than they would be able to achieve alone.
Typically, these mining pools will distribute block rewards to contributing miners based on the proportion of the hash rate they supply. If a pool contributing a total of 20 TH/s of hash rate successfully mines the next block, a user responsible for 10 percent of this hash rate will receive 10 percent of the 12.5 BTC reward.
Pools essentially allow smaller miners to compete with large private mining organizations by ensuring that the collective hash rate is high enough to successfully mine blocks on regular basis. Without operating through a mining pool, many miners would be unlikely to discover any blocks at all — due to only contributing a tiny fraction of the overall Bitcoin hash rate.
While it is quite possible to be successful mining without a pool, this typically requires an extremely large mining operation and is usually not recommended — unless you have enough hash rate to mine blocks on a regular basis.
Although it is technically possible to discover blocks mining solo and keep the entire 12.5 BTC reward for yourself, the odds of this actually occurring are practically zero — making pool collaboration practically the only way to compete in 2019 and beyond.
Selecting the best pool for you can be a challenging job since the vast majority of pools are quite similar and offer similar features and comparable fees. Because of this, we have broken down the qualities you should be looking for in a new pool into four categories; reputation, hash rate, pool fees, and usability/features:
The reputation of a pool is one of the most important factors in selecting the pool that is best for you. Well-reputed pools will tend to be much larger than newer or less well-established pools since few pools with a poor reputation can stand the test of time.
Well-reputed pools also tend to be more transparent about their operation, many of which provide tools to ensure that each user is getting the correct reward based on the hash rate contributed. By using only pools with a great reputation, you also ensure your hash rate is not being used for nefarious purposes — such as powering a 51 percent attack.
When comparing a list of pools that appear suitable for you, it is a wise move to read their user reviews before making your choice — ensuring you don’t end up mining at a pool that steals your hard-fought earnings.
Hash Rate
When it comes to mining Bitcoin, the probability of discovering the next block is directly related to the amount of hashing power you contribute to the network. Because of this, one of the major features you should be considering when selecting your pool is its total hash rate — which is often closely related to the proportion of new blocks mined by the pool
Since the total hash rate of a pool is directly related to how quickly it discovers new blocks, this means the largest pools tend to discover a relative majority of blocks — leading to more regular rewards. However, the very largest pools also tend the have higher fees but often make up for this with sheer success and additional features.
Sometimes, some of the largest pools have a minimum hash rate requirement ù leaving some of the smaller miners left out of the loop. Although smaller pools typically have more relaxed requirements with reduced performance thresholds, these pools may be only slightly more profitable than mining solo.
Pool Fees
When choosing a suitable pool, typically one of the major considerations is its fees. Typically, most pools will charge a small fee that is deducted from your earnings and is usually around 1-2 percent — but sometimes slightly lower or higher.
There are also pools that offer 0 percent fees. However, these are often much smaller than the major pools and tend to make their money in a different way — such as through monthly subscriptions or donations.
Ideally, you will choose the pool that offers the best balance of fees to other features. Usually, the pool with the absolute lowest fees is not the best choice. Additionally, pools with the lowest fees often have the highest withdrawal minimums — making pool hopping uneconomical for most.
Usability and Features
When first starting out with Bitcoin mining, learning how to set up a pool and navigating through the settings can be a challenge. Because of this, several pools target their services to newer users by offering a simple to navigate user interface and providing detailed learning resources and prompt customer support.
However, for more experienced miners, simple pools don’t tend to offer a variety of features needed to maximize profitability. For example, although many mining pools focus their entire hash rate towards mining a single cryptocurrency, some are large enough to offer additional options — allowing users to mine other SHA256 coins such as Bitcoin Cash (BCH) or Fantom if they choose.
These pools are technically more challenging to use and mostly designed for those familiar with mining, happy to hop from coin to coin mining whichever is most profitable at the time. There are even some exchanges that automatically direct their combined hash rate at the most profitable cryptocurrency — taking the guesswork out of the equation.
bitcoin mining pool
Best Mining Pools for 2019
The Bitcoin mining pool industry has a large number of players, but the vast majority of the Bitcoin hash rate is concentrated within just a few pools. Currently, there are dozens of suitable pools to choose from — but we have selected just a few of the best to help get you started on your journey.
Slushpool was the first Bitcoin mining pool released, being launched way back in 2010 under the name “Bitcoin Pooled Mining Server.” Since then, Slushpool has grown into one of the most popular pools around — currently accounting for just under 10 percent of the total Bitcoin hash rate.
Although Slushpool isn’t one of the very largest pools, it does offer a newbie-friendly interface alongside more advanced features for those that need them. The pool has moderately high fees of 2 percent but offers servers in several countries — including the U.S., Europe, China, and Japan — giving it a good balance of fees to features. is another potential candidate for your pool and currently stands as the largest public Bitcoin mining pool. It is responsible for mining around 17 percent of new blocks. Being the largest public mining pool provides users with a sense of security, ensuring blocks are mined regularly and a stable income is made.
Image courtesy of is owned by Bitmain, a company that manufacturers mining hardware, and charges a 1.5 percent fees — placing it squarely in the middle-tier in terms of fees. Unlike other platforms, uses its own payment structure known as FPPS (Full Pay Per Share), which means miners also receive a share of the transaction fees included within mined blocks — making it slightly more profitable than standard payment per share (PPS) pools.
Another great option is Antpool, a mining pool that supports mining services for 10 different cryptocurrencies, including Bitcoin, Litecoin (LTC) and Ethereum (ETH). AntPool frequently trades places with as the largest Bitcoin mining pool. However, as of this writing, it occupies the title of the third-largest public mining pool.
What sets Antpool apart from other pools is the ability to choose your own fee system — including PPS, PPS+, and PPLNS. If you choose PPLNS, using Antpool is free but you will not receive any transaction fees from any blocks mined. Antpool also offers regular payouts and has a low minimum payout of just 0.001 BTC, making it suitable for smaller miners.
Last on the list of the best Bitcoin mining pools in 2019 is the mining pool. Although this is one of the smaller pools available, the pool has some redeeming features that make it worth a look. It offers mining contracts, allowing you to test out Bitcoin mining before investing in mining equipment of your own. According to, they are the highest paying Pay Per Share (PPS) pool in the world, offering up to 98 percent block rewards as well as automatic switching between BTC and BCH mining to optimize profitability.

Electricity Costs
While your mining hardware is most important when it comes to how much BTC you can earn when mining, your electricity costs are usually the largest additional expense. With electricity costs often varying dramatically between countries, ensuring you are on the best cost-per-KWh plan available will help to keep costs down when mining.
Most commonly, large mining operations will be set up in countries where electricity costs are the lowest — such as Iceland, India, and Ukraine. Since China has one of the lowest energy costs in the world, it was previously the epicenter of Bitcoin mining. However, since the government began cracking down on cryptocurrencies, it has largely fallen out of favor with miners.
Technically, Venezuela is one of the cheapest countries in the world in terms of electricity, with the government heavily subsidizing these energy costs — while Bitcoin offers an escape from the hyperinflation suffered by the Venezuelan bolivar. Despite this, importing mining hardware into the country is a costly endeavor, making it impractical for many people.
Finding ways to lower your electricity costs is one of the best ways to improve your mining profitability. This can include investing in renewable energy sources such as solar, geothermal, or wind — which can yield increased profitability over the long term.
if you are looking to buy bitcoin mining equipment here is some links:

Model Antminer S17 Pro (56Th) from Bitmain mining SHA-256 algorithm with a maximum hashrate of 56Th/s for a power consumption of 2385W.
Model Antminer S9K from Bitmain mining SHA-256 algorithm with a maximum hashrate of 14Th/s for a power consumption of 1323W.
Model T2T 30Tfrom Innosilicon mining SHA-256 algorithm with a maximum hashrate of 30Th/s for a power consumption of 2200W.
mining wholesale website:
submitted by mohamadk to Bitcoin [link] [comments]

MiningPoolHub/AwesomeMiner/MultiMinningPool FAQ

Hello everyone,
As some of you have probably noticed I have been taking the time to try my best to help some of you answer some questions.
However there has been a lot of repeat questions lately so hopefully this will help. I will continue to update this as we go, please check back if you have any questions as I will try to update this frequently
If you have a question you do not see covered please feel free to comment and I'll add it and try to answer it. I have added a unresolved to the beginning of this FAQ. I will number them below. Please comment below with the answer, to help me identify which question you are answering please add. UR#(x) to your comment as well, with x being the number of the unresolved question.
Before we start I will get my disclaimer out of the way.
I do not work with/for any of the developers of these programs. I do not have all the answers. Some of these are my best guess, others may be wrong or may have a better solution than the one I give. Please feel free to correct me if this is the case and I will edit as we go.
We have two text guides here by waffleflops one for awesome miner and one for multi mining pool.
We also have a YouTube video guide by razorseal
YouTube Video Guide: Here
Awesome Miner(AM): Text Tutorial
MultiPoolMiner(MPM): Text Tutorial
So which one should I use?
It seems like it depends on what you want from the program, Awesome Miner is more like Nicehash in the way it looks but can be a little more complicated. MPM is pretty simple but it has less customization for those not familiar with programming.
NX18: "I find MPM to be better. No stability issues, no funky windows service always running in the background, and it checks MPH for best coin to mine whereas AM checks and they differ significantly sometimes."
MPM also has a minimum dev fee of 10 minutes per day (even if you set donate to 0) whereas AM does not seem to have dev fees. Both I believe have fees included that go to the devs of the miner programs themselves. However these fees for the miner devs will be attached whether you use MPM/AM or solo miner with the miner dev programs anyway.
Unresolved Questions
1. Anyone have solutions on crashing or very low Hashrates in sgminers with AMD GPU's in Awesome Miner?
2. Why is Lyra2Z using only 40% power from my GPU (GTX980ti)? Where/how can it tweak the settings?
I believe this is having to do with Awesome Miner 3.I did not see it asked or posted but I am curious if there's a way to bench all gpus. Instead of selecting gpu 0 and benching, waiting until its done and moving on to gpu 1 and so on. I have 8 nvidia gpus, just wondering if there's a way to auto bench all of them in a row so I can walk away and go to bed, be done I'm the middle of the night.
General MPH Questions
1.Hashrate is not the same on my miner as it is on the dashboard?
From MPH: "Hashrate showing on site is just an estimated value. Pool doesn't know about miner very much. It just collects certain "shares" which is some piece of hash that satisfies certain conditions. So don't worry, it's all about probability thing. Your hashrate on site can go up and down time to time."
There is some luck involved when mining in pools it is like playing the lottery. NiceHash paid at a certain rate because you were not mining coins and getting paid you were getting paid for the hash you are providing.
2. Balances on MPH what are the brackets?
The brackets are coins that have not yet been confirmed enough times on the blockchain. Any coins not in brackets have been confirmed.
3. How long will it take for my coins to show up, transfer to and from the exchange, be credited to my auto exchange coin?
I have been seeing a lot of questions about this so I made a flowchart which you can view Here
Short Answer: It depends could be minutes could be days
Long Answer: It has to be exchanged first and then placed in auto-exchange balance balance.
So you mine coin
Coin credited but unconfirmed (this can take time depending on coin)
Coin is confirmed and credited for auto exchange.
Coin is then placed on exchange. So again has to be transferred and again has to be confirmed but on exchange side.
Coin is most likely converted into btc then into auto-exchange coin at exchange.
Then auto-exchange coin is sent back to your balance on mph. So again has to be confirmed before appearing.
Depending on how fast a coin is confirmed will depend on how fast it appears in your balance.
If you stopped mining today it your balance most likely continue to grow over time.
However if you continue to mine it should in theory catch up and you will see you balance grow at a semi if not expected rate.
Supplemental:Forgive me if I'm misunderstanding, but this should mean it changes column, not disappears from balance entirely, no?
You will not know exact balance until it is sent back over from the exchange. This is because of the fact that you are exchanging the coins against one another. If one coin is up and one is down you could be losing or gaining value depending on the situation. This is why it seems that coins on the exchange disappear without your auto-exchange coins balance going up right away. Reference question 8 for more info
4. What is the best coin to auto-exchange?
This depends, just remember BTC has high transaction fees and can take some time to confirm. You will want to have a good amount of BTC before moving to your wallet to minimize the amount you lose to transaction fees.
I personally use LTC, it is quick and transaction fees are low compared to BTC but can still be exchanged for fiat on coinbase.
At the time of writing this, if you move BTC from MPH you will be charged a $4.96 fee, if you move LTC the fee to move to your wallet is $0.19
5. Can I hold on to certain coins instead of auto-exchanging them?
Yes, just go to auto exchange on MPH and switch off the coin you do not want to auto exchange.
6. This dashboard sucks! Why do they not have a one page dashboard?
Good news it is in the works, improvements are on the way so no need to keep posting about it!
7. Why is my coin not being exchanged?
Two possible reasons A)On balances page it says "coins that don't have enough volume on exchange for a certain amount of time will not be auto exchanged to desired coin. These coins may be sent back as original coin or btc."
B)On auto-exchange page. Mph accumulates coins so that they can be efficiently converted at the exchange. If a coins pool has not mined a certain amount it will not be sent over until it reaches the set number. It seems like it is transferred over to the exchange as one large amount instead of small amounts.
8. AwesomeMiner said I was going to make $X.XX dollars and when auto-exchange coins came in I made less than it said!
Couple things, do not take to heart the exact number it gives you. It is not exact remember it is like a lottery.
Remember your coins at first will trickle in over time but the longer you mine it will begin to average out.
Remember you are exchanging coins for you auto-exchange coin this means if there is a decrease or increase between them you could gain more or less.
Example if you mine VTC and auto-exchange into LTC.
You send VTC to auto-exchange it will most likely be converted into BTC first. If BTC is having a good day that day and has increased in price by 30% and VTC has not grown well that day you will be trading your VTC at a loss.
Then this same situation will happen again when converting the BTC to LTC.
So again a bit of a lottery you may gain or lose some of your mined coins value depending on the exchange rate between the coins at the time.
9. Add more Cryptonight coins please.
They are apparently working on adding new coins like Electroneum.
10. Why can't I auto-exchange BTC?
My theory is that it is because BTC is not mined on MPH, remember the coins are sent to the exchange when they hit a certain amount in order to make it efficient. Because BTC is not mined on MPH it would not be efficient to exchange BTC to other coins once it has been credited to your account.
11. Do I need a wallet for each coin I mine? How do I set-up a wallet?
No, only the coin(s) you want to get paid in. Click on coins pool on MPH and you will see a wallet option Add the correct address for each coin you want to be paid in, note you cannot use another coins address or you risk losing your coins. For example you should not put your Bitcoin address into your Litecoin wallet address section.
12. My wallet address keeps on changing, do I need to keep updating my wallet address?
Take from Coinbase: This is done to protect your privacy, so that a third-party can not view all other transactions associated with your account simply by using a blockchain explorer to look-up an address they know to be yours.
All addresses that have been generated for your account will remain associated with your account forever. They are safe to re-use to receive future payments, but for the prior stated reasons, we recommend using a unique address for all transactions.
13.Is there a easy way I can track my Profits/Hashrate/Workers?
Yes credit to JaymZZZ Click Here
14. I click on manage wallet from the balances menu and enter my account number, I get the error saying Failed to update your account: Invalid coin address.
Make sure you are adding the address to the correct coin. A bitcoin address for example should only be added to the bitcoin wallet, it should not be added to any other wallet. (Reference question 11)
15. Is there a fee for auto-exchange?
Yes 0.2%
Awesome Miner
1. I do not want to mine that algo, I turn it off but it still mines it!
Go to online services, edit, change profit switching from yes to no
2. Why is it mining something less profitable?
Make sure you go to tools and then benchmark Make sure you right click and save hashrate occasionally it will improve your profit switching over time.
3. I can't get the miner to run?
Did you exclude it from anti-virus?
You may need to reinstall.
then in search bar type in %localappdata%\awesomeminer (delete this folder)
Type in %appdata% go to awesome miner folder and delete this one as well
Reinstall awesomeminer
Do not run aweseomminer
Go to anti-virus and exclude all folders with awesomeminer (including the ones in the local and appdata folders)
4. How do i delete a Miner?
5. Can I do anything to make improvements?
puch0021:You can use VertMiner (which is what is used by OCM) to increase your hash rate compared to AwesomeMiner's default CCminer. You have to choose it for Lyra instead of CC miner. See: Download Vertminer and extract software. Go to awesomeminer's options -> managed software -> add new user defined mining software: Type in VertMiner for description, full compatibility mode, and compatible software as CCminer. Everything in the algorithm should be disabled expect Lyra2ReV2 which should be enabled. Double click in under defined command line argument and add lyra2v2 as text. Click ok. Go to profit profiles in awesome miner. Select nvidia GPU and edit. In the mining software list there should be a new VertMiner entry. Check this box to enable it. Then click configure and then under path click browse. Click local. Select the Vertminer folder you previously made. Now whenever lyra is called for, vertminer should be used. If you try to bench mark with this enabled, it will fail but it works for mining. You can then use your mining results to manually edit your profit profile value for Lyra2REv2 (that was otherwise has the old value for ccminer.) On my 1060 it went from 21 to 22.8. Keep in mind vertminer takes 2% dev fees but it still works out to be faster than cc miner. let me know if this was any help!
I used one click miners vertminer since it was already installed.
6. Whenever Awesome Miner starts on a new algo and opens new instances of the CLI miner application/s, the window steal the focus from whatever you're doing. Anyone else super annoyed by this? Anyone know of a way to prevent this?
Stop mining, click more, properties, environment, console window mode, hide window, start mining again.
MultiPoolMiner (MPM)
1. I see a yellow stripe wich says multipoolminer is between 7% and 17% more profitable, which is nice. under this strip I see 2 lines with miner, BTC and Euro. (in my case) which of those btc values end up on your miningpoolhub balance? or both?
NX18:" Neither. Those values are best guesses by that script, hence why beside the dollar figure it shows the +/- variance which sometimes is really high like 25%, meaning that scripts best guess could be wrong by that much"
It is showing the 2nd best, If it is not the best at the time it will not show that text and just give you the comparison.
2. It keeps say NiceHash API failed what should I do? You can ignore it or as chillfisch points out that you can just delete the nicehash folder to get rid of this warning.
BTC: 16pVcKVFRJnCpR3hohMZtSTuiFiYy8MuCY LTC: LagCM9kiRHSbfx7ycCdrsae3QxqyycrFEr ETH: 0x6bbfe42dadc1894a19ad448b8296E7e7da383D2d
Waffleflops (MPM and Awesome Miner tutorial creator)
BTC: 17zd54AxSZekcPkVyEiX6TrcJkUe2qja51 LTC: LeyvTNrQfrhHK8TgtB8qWzKTMmNSaRif5m ETH: 0xaE19a33f3f9568e8775A05A92DF2fca4f3a5405b
JaymZZZ (Profit/Hashrate/Worker tracker creator)
BTC: 17ZjS6ZJTCNWrd17kkZpgRHYZJjkq5qT5A LTC: LdGQgurUKH2J7iBBPcXWyLKUb8uUgXCfFF ETH: 0x6e259a08a1596653cbf66b2ae2c36c46ca123523
razorseal (YouTube video guide creator)
BTC: 13UtW3vN4DKmmjV45dL5LHwcV8svu9tuzz LTC: Lh2DiirhVhFdX9VwWS5cY9dxyRGKV9JDGs ETH:0x260fAdC32972ca102C5CA3fAF3996C609C6C0311
submitted by Gator-Empire to MiningPoolHub [link] [comments]

How do I mine Dogecoin?

How do I mine Dogecoin?
Let’s take a lucky guess that you’re here today because you’ve heard a lot about cryptocurrencies and you want to get involved, right? If you’re a community person, Dogecoin mining might be the perfect start for you!
Bitcoin was the first in 2009, and now there are hundreds of cryptocurrencies. These new coins (that operate on their own native blockchain) are called altcoins or alternative coins. One popular altcoin is Dogecoin. It can be bought, sold and traded, just like Bitcoin. It can also be mined!
So, what is Dogecoin mining?
You’ll know what hardware and what software you need to get started. You’ll also know whether or not Dogecoin mining is for you!
So, where would you like to start? The beginning? Great choice. Let’s have a quick look at how Dogecoin got started.
A (Very) Short History of Dogecoin
In 2013, an Australian named Jackson Palmer and an American named Billy Markus became friends. They became friends because they both liked cryptocurrencies. However, they also thought the whole thing was getting too serious so they decided to create their own.
Palmer and Markus wanted their coin to be more fun and more friendly than other crypto coins. They wanted people who wouldn’t normally care about crypto to get involved.
They decided to use a popular meme as their mascot — a Shiba Inu dog.
Dogecoin was launched on December 6th, 2013. Since then it has become popular because it’s playful and good-natured. Just like its mascot!
Dogecoin has become well-known for its use in charitable acts and online tipping. In 2014, $50,000 worth of Dogecoin was donated to the Jamaican Bobsled Team so they could go to the Olympics. Dogecoin has also been used to build wells in Kenya. Isn’t that awesome!
Users of social platforms – like Reddit – can use Dogecoin to tip or reward each other for posting good content.
Dogecoin has the 27th largest market cap of any cryptocurrency.
Note: A market cap (or market capitalization) is the total value of all coins on the market.
So, Dogecoin is a popular altcoin, known for being fun, friendly and kind. It’s a coin with a dog on it! You love it already, don’t you?
Next, I want to talk about how mining works…
What is Mining?
To understand mining, you first need to understand how cryptocurrencies work. Cryptocurrencies are peer-to-peer digital currencies. This means that they allow money to be transferred from one person to another without using a bank.
Every cryptocurrency transaction is recorded on a huge digital database called a blockchain. The database is stored across thousands of computers called nodes. Nodes put together groups of new transactions and add them to the blockchain. These groups are called blocks.
Each block of transactions has to be checked by all the nodes on the network before being added to the blockchain. If nodes didn’t check transactions, people could pretend that they have more money than they really do (I know I would!).
Confirming transactions (mining) requires a lot of computer power and electricity so it’s quite expensive.
Blockchains don’t have paid employees like banks, so they offer a reward to users who confirm transactions. The reward for confirming new transactions is new cryptocurrency. The process of being rewarded with new currency for confirming transactions is what we call “mining”!
It is called mining because it’s a bit like digging for gold or diamonds. Instead of digging with a shovel for gold, you’re digging with your computer for crypto coins!
Each cryptocurrency has its own blockchain. Different ways of mining new currency are used by different coins where different rewards are offered.
So, how do you mine Dogecoin? What’s special about Dogecoin mining? Let’s see…
What is Dogecoin Mining?
Dogecoin mining is the process of being rewarded with new Dogecoin for checking transactions on the Dogecoin blockchain. Simple, right? Well no, it’s not quite that simple, nothing ever is!
Mining Dogecoin is like a lottery. To play the lottery you have to do some work. Well, actually your computer (or node) has to do some work! This work involves the confirming and checking of transactions which I talked about in the last section.
Lots of computers work on the same block of transactions at the same time but the only one can win the reward of new coins. The one that earns the new coins is the node that adds the new block of transactions to the old block of transactions. This is completed using complex mathematical equations.
The node that solves the mathematical problem first wins! It can then attach the newly confirmed block of transactions to the rest of the blockchain.
Most cryptocurrency mining happens this way. However, Dogecoin mining differs from other coins in several important areas. These areas are;
  • Algorithm: Each cryptocurrency has a set of rules for mining new currency. These rules are called a mining or hashing algorithm.
  • Block Time: This is the average length of time it takes for a new block of transactions to be checked and added to the blockchain.
  • Difficulty: This is a number that represents how hard it is to mine each new block of currency. You can use the difficulty number to work out how likely you are to win the mining lottery. Mining difficulty can go up or down depending on how many miners there are. The difficulty is also adjusted by the coin’s protocol to make sure that the block time stays the same.
  • Reward: This is the amount of new currency that is awarded to the miner of each new block.
Now, let’s compare how DogeCoin mining works compared to Litecoin and Bitcoin…
Mining Comparison
Bitcoin uses SHA-256 to guide the mining of new currency and the other two use Scrypt. This is an important difference because Scrypt mining needs a lot less power and is a lot quicker than SHA-256. This makes mining easier for miners with less powerful computers. Fans of Litecoin and Dogecoin think that they are fairer than Bitcoin because more people can mine them.
Note: In 2014, Litecoin and Dogecoin merged mining. This means they made it possible to mine both coins in the same process. Dogecoin mining is now linked with Litecoin mining. It’s like two different football teams playing home games in the same stadium!
Mining Dogecoin is a lot faster than mining Litecoin or Bitcoin. The block reward is much higher too!
Don’t get too excited though (sorry!). Dogecoin is still worth a lot less than Bitcoin and Litecoin. A reward of ten thousand Dogecoin is worth less than thirty US Dollars. A reward of 12.5 Bitcoin is currently worth 86,391.63 US Dollars!
However, it’s not as bad as it sounds. Dogecoin mining difficulty is more than one million times less than Bitcoin mining difficulty. This means you are much more likely to win the block reward when you mine Dogecoin.
Now I’ve told you about what Dogecoin mining is and how it works, would you like to give it a try?
Let’s see what you need to do to become a Dogecoin miner…
How to Mine Dogecoin
There are two ways to mine Dogecoin, solo (by yourself) or in a Dogecoin mining pool.
Note: A Dogecoin pool is a group of users who share their computing power to increase the odds of winning the race to confirm transactions. When one of the nodes in a pool confirms a transaction, it divides the reward between the users of the pool equally.
Dogecoin Mining: Solo vs Pool
When you mine as a part of a Dogecoin pool, you have to pay fees. Also, when the pool mines a block you will only receive a small portion of the total reward. However, pools mine blocks much more often than solo miners. So, your chance of earning a reward (even though it is shared) is increased. This can provide you with a steady new supply of Dogecoin.
If you choose to mine solo then you risk waiting a long time to confirm a transaction because there is a lot of competition. It could be weeks or even months before you mine your first block! However, when you do win, the whole reward will be yours. You won’t have to share it or pay any fees.
As a beginner, I would recommend joining a Dogecoin pool. This way you won’t have to wait as long to mine your first block of new currency. You’ll also feel like you’re part of the community and that’s what Dogecoin is all about!
What You Need To Start Mining Dogecoin
Before you start Dogecoin mining, you’ll need a few basics. They are;
  • A PC with either Windows, OS X or Linux operating system.
  • An internet connection
  • A Shiba Inu puppy (just kidding!)
You’ll also need somewhere to keep the Dogecoin you mine. Go to Dogecoin’s homepage and download a wallet.
Note: A wallet is like an email account. It has a public address for sending/receiving Dogecoin and a private key to access them. Your private keys are like your email’s password. Private keys are very important and need to be kept completely secure.
There are two different types; a light wallet and a full wallet. To mine Dogecoin, you’ll need the full wallet. It’s called Dogecoin Core.
Now that you’ve got a wallet, you need some software and hardware.
Dogecoin Mining Hardware
You can mine Dogecoin with;
  • Your PC’s CPU: The CPU in your PC is probably powerful enough to mine Dogecoin. However, it is not recommended. Mining can cause less powerful computers to overheat which causes damage.
  • A GPU: GPUs (or graphics cards) are used to improve computer graphics but they can also be used to mine Dogecoin. There are plenty of GPUs to choose from but here are a few to get you started;SAPPHIRE Pulse Radeon RX 580 ($426.98)Nvidia GeForce GTX ($579.99)ASUS RX Vega 64 ($944.90)
  • A Scrypt ASIC Miner: This is a piece of hardware designed to do one job only. Scrypt ASIC miners are programmed to mine scrypt based currencies like Litecoin and Dogecoin. ASIC miners are very powerful. They are also very expensive, very loud and can get very hot! Here’s a few for you to check out;Innosilicon A2 Terminator ($760)Bitmain Antminer L3 ($1,649)BW L21 Scrypt Miner ($7,700)
Dogecoin Mining Software
Whether you’re mining with an ASIC, a GPU or a CPU, you’ll need some software to go with it. You should try to use the software that works best with the hardware you’re using. Here’s a short list of the best free software for each choice of mining hardware;
  • CPU: If you just want to give mining a quick try, using your computer’s CPU will work fine. The only software I would recommend for mining using a CPU only is CPU miner which you can download for free here.
  • GPU: If you mine with a GPU there are more software options. Here are a few to check out;CudaMiner– Works best with Nvidia products.CGminer– Works with most GPU hardware.EasyMiner– User-friendly, so it’s good for beginners.
  • Scrypt ASIC miner:MultiMiner– Great for mining scrypt based currencies like Litecoin and Dogecoin. It can also be used to mine SHA-256 currencies like Bitcoin.CGminer and EasyMiner can also be used with ASIC miners.
You’re a beginner, so keep it simple! When you first start mining Dogecoin I would recommend using a GPU like the Radeon RX 580 with EasyMiner software. Then I would recommend joining a Dogecoin mining pool. The best pools to join are multi-currency pools like Multipool or AikaPool.
If you want to mine Dogecoin but don’t want to invest in all the tech, there is one other option…
Dogecoin Cloud Mining
Cloud mining is mining without mining! Put simply, you rent computer power from a huge data center for a monthly or yearly fee. The Dogecoin is mined at the center and then your share is sent to you.
All you need to cloud mine Dogecoin is a Dogecoin wallet. Then choose a cloud mining pool to join. Eobot, Nice Hash and Genesis Mining all offer Scrypt-based cloud mining for a monthly fee.
There are pros and cons to Dogecoin cloud mining;
The Pros
  • It’s cheaper than setting up your own mining operation. There’s also no hot, noisy hardware lying around the house!
  • As a beginner, there isn’t a lot of technical stuff to think about.
  • You get a steady supply of new currency every month.
The Cons
  • Cloud mining pools don’t share much information about themselves and how they work. It can be hard to work out if a cloud mining contract is a good value for money.
  • You are only renting computer power. If the price of Dogecoin goes down, you will still have to pay the same amount for something that is worthless.
  • Dogecoin pools have fixed contracts. The world of crypto can change very quickly. You could be stuck with an unprofitable contract for two years!
  • It’s no fun letting someone else do the mining for you!
Now you know about all the different ways to mine Dogecoin we can ask the big question, can you make tons of money mining Dogecoin?
So, Is Dogecoin Mining Profitable?
The short answer is, not really. Dogecoin mining is not going to make you a crypto billionaire overnight. One Dogecoin is worth 0.002777 US Dollars. If you choose to mine Dogecoin solo, it will be difficult to make a profit. You will probably spend more money on electricity and hardware than you will make from Dogecoin mining. Even if you choose a Dogecoin pool or a cloud pool your profits will be small.
However, if you think I am telling you to not mine Dogecoin, then you’re WRONG! Of course, I think you should mine Dogecoin!
But why? Seriously…
Well, you should mine Dogecoin because it’s fun and you want to be a part of the Dogecoin family. Cryptocurrency is going to change the world and you want to be part of that change, right? Mining Dogecoin is a great way to get involved.
Dogecoin is the coin that puts a smile on people’s faces. By mining Dogecoin you’ll be supporting all the good work its community does. You’ll learn about mining from the friendliest gang in crypto. And who knows? In a few years, the Dogecoin you mine now could be worth thousands or even millions! In 2010, Bitcoin was worthless. Think about that!
Only you can choose whether to mine Dogecoin or not. You now know everything you need to know to make your choice. The future is here. So, what are you going to do?
submitted by alifkhalil469 to BtcNewz [link] [comments]

Why I just sold 50% of my bitcoins: GHash.IO

tl;dr: GHash.IO shows that the economic incentives behind Bitcoin are probably very flawed, it might take a disaster to get the consensus to fix it, and if that happens I want to make sure I can pay my rent and buy food while we're fixing it.
I made a promise to myself a while back that I'd sell 50% of my bitcoins if a pool hit 50%, and it's happened. I've known for awhile now that the incentives Bitcoin is based on are flawed for many reasons and seeing a 50% pool even with only a few of those reasons mattering is worrying to say the least.
Where do we go from here? We need to do three things:
1) Eliminate pools.
2) Provide a way for miners to solo-mine with low varience and frequent mining payouts even with only small amounts of hashing power.
3) Get rid of ASICs.
Unfortunately #3 is probably impossible - there is no known way to make a PoW algorithm where an ASIC implementation isn't significantly less expensive on a marginal cost basis than an implementation on commodity hardware. Every way people have tried has the perverse effect of increasing the cost to make the first ASIC, which just further centralizes mining. Absent new ideas - ideas that will be from hardware engineers, not programmers - SHA256² is probably the best of many bad choices. (and no, PoS still stands for something other than 'stake')
We are however lucky that we have physics and (maybe) international relations on our side. It will always be cheaper to run a small amount of hashing power than a large amount, at least for some value of 'small' and 'large'. It's the cube-square law, as applied to heat dissipation: a small amount of mining equipment has a much larger surface area compared to a large amount, and requires much less effort per unit hashing power to keep cool. Additionally finding profitable things to do with small amounts of waste heat is easy and distributed all over the planet - heating houses, water tanks, greenhouses, etc. As for international relations, restricting access to chip fabrication facilities is a very touchy subject due to how it can make or break economies, and especially militaries. (but that's a hopeful view)
Solving problem #1 and getting rid of pools is probably possible - Andrew Miller came up with the idea of a non-outsourceable puzzle. While tricky to implement, the basic idea is simple: make it possible for whomever finds the block to steal the reward, even after the fact, in a way that doesn't make it possible to prove any specific miner did it. Adding this protection to Bitcoin requires a hard-fork as described, though perhaps there's a similar idea that can be done as a soft-fork. Block withholding attacks - where miners simply don't submit valid solutions - could also achieve the same goal, although in a far uglier way.
Solving problem #2 and letting miners achieve low varience even with a small amount of hashing power is also possible - p2pool does it already, and tree chains would do it as a side effect. However p2pool is itself just another type of pool, so if non-outsourceable puzzles are implemented they'll need to be compatible. p2pool in its current form is also less then ideal - it does need a lot of bandwidth, and if you have lower latency than average you have a significant unfair advantage. But these are problems that (probably) can be fixed before adding it to the protocol. (this can be done in a soft-fork)
Do I still think Bitcoin will succeed in the long run? Yes, but I'm a lot less sure of it than I used to be. I'm also very skeptical that any of the above will be implemented without a clear failure of the system happening first - there's just too many people, miners, developers, merchants, etc. whose heads are in the sand, or even for that matter, actively making the problem worse. If that failure happens it's quite likely that the Bitcoin price will drop to essentially nothing - not a good way to start a few months of work fixing the problem when my expenses are denominated in Canadian dollars. I hope I'm on the wrong side of history here, but I'm a cautious guy and selling a significant chunk of bitcoins is just playing it safe; I'm not rich.
BTW If you owe me fiat and normally pay me via Bitcoin, for the next 2.5 weeks you can pay me based on the price I sold at, $650 CAD.
submitted by petertodd to Bitcoin [link] [comments]

Jumping on the Mining craze (In the UK) Wanting advice please

It seems with the stock market of bitcoin becoming more stable that it is a good time to jump on to Bitcoin and Alt coin mining. This is not because I want passive income or to get rich, I just want to learn and be pro-active. Electricity is not a problem. However, start up capital is.

I have low (average) spec computers and a small budget - but very low cost electricity. I do not mind if it is not profitable as I just want to learn and get into it. I want to start by Solo mining but I am open to cloud mining as well. I have been told it is best to start with lower currencies to learn the software as you find more blocks more often (lower value).

First question: Is it best to start with a BitMain antminer USB to the computer or to go all in with an old S9 Antminer or to go brand new? I want to keep my initial investment low to learn the software and system. So I am thinking the BitMain Antminer is best for me (around £45-55) rather than a second hand s9 Antminer (£200-300). Please can you tell me some good start up software to buy from ebay etc.

Second question: This is related to the initial set up of the piece of software in question and how to decrypt blocks when found.

Any further advice/help would be greatly appreciated - I am going to be buying some software and doing some more research in the next week. I have a E-Wallet on CoinBase and BlockChain already as I own a few cyrpto-currency at the moment.

Thank you for your time!
submitted by ryaster2 to BitcoinMining [link] [comments]

Mega FAQ (Or: Please come here for your questions first)

Qbundle Guide (Step by step setup & Bootstrap)
1( I want to mine or activate My account. Where do find the multiple coins?
You only need 1, an outgoing transaction or reward reassignment will set the public key. Get them from:
Or (Faucet list) (if this is empty, come back later)
2( I bought coins on Bittrex and want to move to my new wallet, but can't. Why?
Bittrex will only send to accounts with a public key (not a Burst requirement) so see number 1 and either set the name on the account (IF you will not mine) or set the reward recipient to the pool. Either action will enable the account and allow for transfers from Bittrex.
3( I sent coins from Poloniex/anywhere to Bittrex and they don’t show up after a considerable time. Why?
You need to set an unencrypted message on the transaction, informing Bittrex which account to send the funds to (this is in the directions on Bittrex). Did you do this? Contact Bittrex support with all the details and eventually you will get your funds.
4( How much can I make on Burst?
Gives you an average over time assuming a few things like: Average luck/100% uptime/no overlapping/fees on pool/good plot scan time (<20 seconds) if you do not have all of these, you may not see that number.
5( If I use SSD’s would I make more money?
No, it’s 95% capacity and 5% scan time that determine success. More plot area = better deadlines = better chance of forging a block, or better rates from a pool.
6( What is ‘solo’ and ‘pool’ (wasn’t his name Chewbacca?)
Solo is where you attempt to ‘forge’ (mine) a block by yourself; you get 100% of the block reward and fees. But you only receive funds if you forge, no burst for coming in second place.
Pools allow a group of miners to ‘pool’ together their resources and when a miner wins, they give the pool the winnings (this is done by the reward assignment you completed earlier), it is then divided according to different percentages and methods and burst is sent out according to pool rules (minimum pay-out, time, etc.)
7( I have been mining for 2 days and my wallet doesn’t show any Burst WHY?
Mining solo: it is win-or-lose, nothing in between, and wining is luck and plot size. Pool mining: because it costs 1 burst to send burst, the pools have either a time requirement (every X days) or a minimum amount (100 burst +) so you need to research your pool. Some pools allow for you to set the limit (cryptoGuru and similar) to be met before sending
8( How do I see what I have pending?
On CryptoGuru, based pools, it’s the ‘Pending (burst)’ column, other pools, look for the numbers next to your burst ID. One is Paid and the other pending.
9( I’m part of a pool and I forged a block, but I didn’t recieve the total value of the block, why?
A pool has 2 basic numbers that denote the pay-out method, in the format ‘XX-XX’ (i.e. 50-50) The first number is the % paid to the block forger (miner) and the second is the retained value, which is paid to historic ‘shares’ (or, past blocks that the pool didn’t win, but had a miner that was ‘close’ to winning with a good submitted deadline)
Examples of pools:
0-100 (good for <40TB)
20-80 (30-80TB)
50-50 (60-200TB)
80-20 (150-250)
100-0 (solo mine, 150+ TB)
Please note that there is an overlap as this is personal preference and just guidance; a higher historical share value means a smoother pay-out regime, which some people prefer. If fees are not factored in, or are the same on different pools, the pay-out value will be the same over a long enough period.
10( Is XXX model of hard drive good? Which one do you recommend?
CHEAP is best. If you have 2 new hard drives, both covered by warranty, get the one with the lowest cost per TB (expressed as $/TB , calculated by dividing the cost by the number of terabytes) because plot size is KING,
11( How many drives can I have on my machine?
For best performance, you can have up to 2 drives per thread (3 on a new fast AVX2 CPU). So that quad-core core-2-quad can have up to 8 drives, but a more modern i7 with 4 cores + hyper threading can squeeze 8 * 3 or 24 drives. (Performance while scanning will suffer)
12( Can I game while I mine?
Some people have done so, but you cannot have the ‘maximum’ number of drives and play games generally.
13( Can I mine Burst and GPU mine other coins?
Yes, if you CPU Mine Burst.
14( I’m GPU plotting Burst and GPU mining another coin, my plots are being corrupted, why?
My advice is dedicating a GPU to either mining or plotting, don’t try to do both.
15( What is a ‘plot’?
A plot is a file that contains Hashes, these hashes are used to mine burst. A plot is tied to an account, but they can be created (with the same account ID) on other machines and connected back to your miner(s).
16( Where can I trade/buy/sell Burst?
A list of exchanges is maintained on (on the right, ‘Exchanges’ tab) the biggest at the moment are Bittrex and Poloniex, some offer direct Fiat-to-Burst purchase ( for example)
17( Do I have to store my Burst off the exchange?
No, but it’s safer from hackers who target exchanges, if you cannot guarantee the safety or security of your home computer from Trojans etc, then it might be best to leave on an exchange (but enable 2FA security on your account PLEASE!)
18( What security measures can I take to keep my coin safe?
When you create an account, sign out and back in to your wallet (to make sure you have copied the pass phrase correctly) and keep multiple copies of the key (at least one physically printed or written down and in a safe place, better in 2 places) do not disclose the passphrase to anyone. Finally use either a local wallet or a trusted web wallet (please research before using any web wallet)
19( How can I help Burst?
Run a wallet, which will act as a node (or if you’re a programmer, contact the Dev team Bring attention to burst (without ‘shilling’ or trying to get people to buy) And help translate into your local language
Be a productive member of the community and contribute experience and knowledge if you can, or help others get into Burst.
20( Will I get coins on the fork(s) and where will they be?
There will be no new coin, and no new coins to be given/air dropped etc, the forks are upgrades to burst and there will not be a ‘classic’ or ‘new’ burst.
21( Will I need to move my Burst off of the exchange for the fork?
No, your transactions are on the block chain, which will be used on the fork, they will be visible after the move; nothing will need to be done on your side.
22( Where can I read about the progress of Burst and news in general on the community?
There is no finer place than
23( What are the communities for Burst and the central website?
Main website:
Reddit: and
Getburst forum:
Official Facebook channel:
(these are the forums that are known to be supporting the current Dev Team)
Other ways to talk to the community:
Telegram (General):
Telegram (Mining):
24( When will Burst partner up with a company?
Burst is a currency, the USD does not ‘partner up’ with a company, the DEV team will not partner up and give over to special interests.
25( Why is the DEV team anonymous?
They prefer anonymity, as it allows them to work without constant scrutiny and questions unless they wish to engage, plus the aim is for Burst to become a major contender, and this brings issues with security. They will work and produce results, they owe you nothing and if you cannot see the vision they provide then please do not ‘invest’ for short term gain.
26( When moon/Lambo/$100/make me rich?
My crystal ball is still broken, come back to the FAQ later for answer (seriously, this is a coin to hold, if you want to day-trade, good luck to you)
27( How can I better educate myself and learn about Dymaxion?
Read about the Dymaxion here:
28( My reads are slow, why?
There are many reasons for this, if your computer has a decent spec it’s likely due to USB3 hub issues, or plugging into a USB2 hub, but other reasons can be multiple plots in the same folder, but it’s best to visit the mining subreddit. They can help more than an simple FAQ
29( I have a great idea for Burst (not proof of stake related)?
Awesome! Please discuss with the DEV team on discord
(Please be aware that this is a public forum, you need to find who to ask/tell)
30( I have a great idea for Burst (Proof of stake related)?
No. if you want a POS, find a POS coin. On the tangle which is being implemented a POS/POW/POC coin can be created, but BURST will always be POC mined. You are welcome to implement a proof of stake coin on this!
31( Will the Dev team burn any coins?
Burst is not an ICO, so any coins will need to be bought to be burnt. You are welcome to donate, but the DEV team have no intention of burning any coins, or increasing the coin cap.
32( When will there be an IOS wallet?
IOS wallet is completed; we are waiting for it to go on the app store. Apple is the delaying factor.
33( Why do overlapping plots matter?
Plots are like collections of lottery tickets (and if only one ticket could win). Having 2 copies is not useful, and it means that you have less coverage of ‘all’ the possible numbers. It’s not good, avoid.
34( My local wallet used to run, I synchronised it before and now it says ‘stopped’. when I start it, it stops after a few seconds, what should I do?
I suggest that you change the database type to portable MariaDB (on Qbundle, at the top, ‘Database’ select, ‘change database’) and then re-import the database from scratch (see 35)
35( Synchronising the block chain is slow and I have the patience of a goldfish. What can I do?
On Qbundle , ‘Database’ select ‘Bootstrap chain’ and make sure the CryptoGuru repository is selected, then ‘start Import’ this will download and quickly stuff the local database (I suggest Portable MariaDB, see 34) (lol, loop)
36( What will the block reward be next month/will the block rewards run out in 6 months? Rewards will carry on into 2026, but transaction fees will be a bigger % by then, and so profitable mining will continue.
37( How can I get started with Burst (wallet/mining/everything) and I need it in a video Watch and be enlightened.
38( Can I mine on multiple machines with the same account?
Yes, if you want to pool mine this can be done (but be prepared for small issues like reported size being incorrect. Just be sure to keep question 33 in mind.)
39( Why do some of my drives take forever to plot?
Most likely they are SMR drives, it’s best to plot onto another SSD and then move the finished plot/part of a plot across to the SMR drive as this is much quicker. SMR drives are fine on the read, just random writes that are terrible.
So plot an SMR drive quickly, plot to a non SMR or better still SSD drive, in as big a chunk as possible (fewer files better) and move. a version of Xplotter, called Splotter, can do this easily.
40( I have a great idea; why not get listed on more exchanges!!
Exchanges list coins because of 2 reasons:
  1. Clients email and REQUESTING Burst and provide details like:
  2. The coin pays (often A LOT, seriously we’ve been asked for 50 BTC)
I suggest you speak with your exchange and ask ‘when will they offer Burst?’
41( Do you have a roadmap?
42( Why is the price of Burst going up/down/sideways/looping through time?
The price of burst is still quite dependent upon Bitcoin, meaning that if Bitcoin gains, the value of Burst gains, if Bitcoin drops then Burst also drops. If there is news for Burst then we will see something independent of Bitcoin moving. Variations can be because of people buying in bulk or selling in bulk. There are also ‘pump and dump’ schemes that we detest, that can cause spikes in price that have nothing to do with news or Bitcoin, just sad people taking advantage of others.
43( Where is the best place to go with my mining questions?
44( What hardware do you advise me to buy, is this computer good?
See question 43 for specific questions on hardware, it depends on so many variables. The ‘best’ in my opinion is a 36 bay Supermicro storage server, usually they have dual 6-core CPU’s and space for 36 drives. No USB cables, plotting and mining monster, anything else, DYOR.
45( Where do you buy your hard drives?
I have bought most from EBay in job lots, and some refurbished drives with short warranties. Everything else I have bought, from Amazon.
46( Can I mine on my Google drive/cloud based storage?
In short: no. If you want to try, and get to maybe 1 TB and then find that your local connection isn’t fast enough, or that shortly after, your account is blocked for various reasons. Please be my guest.
47( Can I mine on my NAS?
Some you can mine with the NAS (if it can run the miner, it can scan locally) but generally they’re not very fast. good for maybe 16 TB? Having a plot on a NAS and mining from another computer depends on the network speed between the NAS and scanning computer. I believe you can scan about 8 TB (maybe a bit more) and keep the scan times to within acceptable, but YMMV.
48( How can I set up a node?
No need to set up a node, just set up a wallet (version 2.0.4) or Qbundle (2.2) and it will do the rest
49( Are the passphrases secured?
I’ll leave the effort to a few people to show how secure a 12-word passphrase is: Key point: brute forcing it will be around 13,537,856,339,904,134,474,012,675,034 years.
50( I logged into my account (maybe with a different burst ID) and see no balance!!
I have dealt with this very issue multiple times, and there are only 3 options:
  1. You have typed in the password incorrectly
  2. You have copy-pasted the password incorrectly
  3. You are trying to log into a ‘local wallet’ which the block chain has not finished updating
The last one generally leaves the burst ID the same, but old balances will show. No, this is not a security problem, and yes, windows loves to add spaces after the phrase you enter when copied, and that space is important in getting to your account.
51( Are there channels for my language?
(there are others, please contact me to put up)
52( I am mining in a pool, and it says that my effective capacity is lower than I actually have, why?
  1. If you've not been mining for >48 hours, or just added additional capacity, it will take time.
  2. The value fluctuates (normally, +-5% but can be up to 10% at times)
  3. Read on the ‘Quick info’ tab about adjusting your deadline to compensate for changes i. revisit once a month for best results
  4. If you have overlapping plots it will also be lower so be aware of this (see question 33)
53( What pool should I join?
First of all, read question 9, after you have understood that it depends on the size (and how patient you are) select from the following list:
54( What miner to use?
I use Blago’s miner, there are many out there but Blago’s works for me on CPU mining, it can be found in Qbundle.
55( What Wallet to use (I use windows)?
Qbundle: guide:
56( What Wallet to use (Linux)? for Debian and Ubuntu, for Mac. read:
57( Will i need to 'replot' after POC2 (second fork) happens?
No, there will be a tool which will optimise, but it is not CPU intensive (it basically re-shuffles your plot) and is just IO intensive. You do not need to replot.
TurboPlotter and are tools that will/can be used to actuate optimization, but PLEASE wait with optimization until after the hard fork.
58( Will the transaction fee always be 1 burst?
No, dynamic fees are coming in the next fork.
submitted by dan_dares to burstcoin [link] [comments]

Is Mining Bitcoin with Solar Power Really Worth Your Money ... By Far The BEST Bitcoin Mining Software In 2020 💸Profitable💸 IS BITCOIN (BTC) MINING WORTH IT 2020?? -PROFITABLE? How Are Mining Profits Now? September 2019 USB miner solo mining profitability - YouTube

Bitcoin mining began as a well paid hobby for early adopters who had the chance to earn 50 BTC every 10 minutes, mining from their bedrooms. Successfully mining just one Bitcoin block, and holding onto it since 2010 would mean you have $450,000 worth of bitcoin in your wallet in 2020. What is Bitcoin Mining Summary. Bitcoin mining is the process of updating the ledger of Bitcoin transactions known as the blockchain.Mining is done by running extremely powerful computers called ASICs that race against other miners in an attempt to guess a specific number.. The first miner to guess the number gets to update the ledger of transactions and also receives a reward of newly minted ... When Bitcoin launched in 2009, it became the world’s first cryptocurrency. By utilizing miners that contribute their excess computation power to validate a movement of funds, it allows the network to remain decentralized. As the value of Bitcoin has increased over time, more and more individuals are now taking the mining plunge. In fact, at… Solo mining: In solo mining, your miner will act as an individual node in the Bitcoin network. You will generate blocks on your own, meaning you will receive the full block creation reward when a block is created. But there will be a long time between consecutive payments. Pool mining: In pool mining, miners pool their resources to act as a single entity to mine Bitcoin. This shared hash power ... Bitcoin mining, 5 to 6 years back was affordable for a small scale business, as the mining equipment were not as expensive as they are today. As the hash rate has quadrupled, Bitcoin mining has become obsolete for Solo miners. What’s gone is gone! But the future is ahead. Therefore, let’s gain some insights about the cryptocurrencies which ...

[index] [27289] [45227] [14423] [42151] [10849] [24999] [42085] [26681] [39172] [44467]

Is Mining Bitcoin with Solar Power Really Worth Your Money ...

We take a look at profitability of USB miner solo mining Bitcoin and Litecoin. What are the chances to find a block on your own own of 12.5 BTC or 25 LTC. Ch... NEW CHANNELS: TechStockHouse: TechCryptoHouse: So is Bitcoin mining worth it in may 2019? is Bitcoin mining in anyway profitable? Or worth it? should purchase a bitcoin mining machine (antminer or ASIC) or build your first mini bitcoin mining ... TIMESTAMPS: Antminer S9: 6:03 Antminer S17: 10:17 Articles and hashtags referenced:#bitcoinnews #bitcoinmining #BitcoinBillionaire GET A Chance To WIN $100 B... Is Bitcoin Mining Profitable RIGHT NOW In Early 2020? - Duration: 21:11. DrUnlimited 26,890 views. 21:11. 6 Things To Consider Before Starting Your Crypto Mining Journey - Duration: 20:07. ...